INSPEED™ SAN STORAGE SWITCH MODEL 355 CHAPTER 3 SWITCH MANAGEMENT
USER’S GUIDE
19
MANAGING THE SWITCH

The InSpeed™ SAN Storage Switch Model 355 provides several options for managing and configuring

the switch to meet the needs of the network environment.

This section describes how to log in to the switch, configure switch and port settings, manage firmware

and configuration files, and configure One-Step Zoning, Automatic Trunking, and Load Balancing.

Frequent Switch Configuration Tasks

A list of frequent switch configuration-related tasks is provided below. The list displays the task, the

corresponding Web Manager command, and a reference to where more information may be found in this

guide.

For information on viewing switch status and information, see “Monitoring the Switch” on page 47.

To… Click… In this guide, see...

View switch status InSpeed™ Storage Switch “Viewing Switch Status” on page 47.
Change general switch
configuration
Switch > Configuration “Configuring the Switch Settings” on page 20.
Change the IP Address Switch > Configuration “Network Location” on page 21
Change the switch speed Switch > Configuration “Switch Speed” on page 22.
View the event log Switch > Event Log “Viewing the Event Log” on page49.
Configure traps Switch > SNMP Traps “Setting SNMP Traps” on page 23.
Upgrade the firmware Switch > Files “Switch Firmware Files” on page35.
Change the Port Smart
Settings
Port > Smart Settings “Configurin g the Port Smart Settings” on
page 27.
Configure One-Step Zoning Advanced Functions >
One-Step Zoning
“One-Step Zoning” on page 36.
Configure Automatic
Trunking
Advanced Functions >
Automatic Trunking
“Automatic Trunking” on page 44.
Configure Load Balancing Advanced Functions >
Load Balancing
“Load Balancing” on page 45.
Reset the switch Reboot “Configuring the Switch Settings” on page 20.