INSPEED™ SAN STORAGE SWITCH MODEL 355 | CHAPTER 3 SWITCH MANAGEMENT |
USER’S GUIDE |
|
Logging in to the Switch
The Web Manager requires users to log in to the switch when changes are made to the switch’s configuration. Log in is not required for viewing switch information.
To log in to the switch:
1.Click Login on any Web Manager page.
A message box appears confirming the login request.
2.Click OK.
The Switch Login page appears.
Figure 3-2: Switch Login page
3. Enter the switch’s password.
Note: If you do not remember the password, contact a customer service representative.
4.Click Log In.
A message page appears while the page is loading. If the page fails to load in the indicated time, click Continue.
Configuring the Switch Settings
Several switch configuration settings may be changed to customize the switch to the network environment. To make a change to the current switch configuration, users must be logged in to the switch or know the switch password (the switch prompts users for the password before accepting changes to any configuration settings).
To change a switch setting:
1.Enter new information or make changes to current settings.
2.Click Submit.
The Web Manager page displays the new settings or information.
Changes to certain switch settings require that the switch be reset for those changes to occur. Users must be logged in to the Web Manager to reset the switch.
To reset the switch:
1.Ensure any changes to the current switch configuration have been saved.
2.Click Reboot on the Web Manager page. The switch will reset.
20
