Varta V-AVM651F

V-AVM651F

In SYSTEM SETUP menu rotate the TUNE/ENT knob on the panel or /

or / buttons on the RC or press the needed button on the display to select

the desired menu: ASP CONFIG, GENERAL SETUP, SCREEN CAL. Press

PLAY/PAUSE button on the RC or TUNE/ENT knob on the panel or press the

needed button on the display to enter the menu selected.

1. Enter the needed menu

2. Rotate the TUNE/ENT knob on the panel or / buttons on the RC or

press the needed button on the display to select the needed setting.

3. Press the TUNE/ENT knob on the panel or / buttons on the RC or press the needed button on the display

to enter the list of values.

4. Press / buttons on the RC or press the needed button on the display to select the needed value.

5. Press PLAY/PAUSE button on the RC or TUNE/ENT knob on the panel to confirm.

Audio sound processing (ASP) configuration

Bass center frequency: select the Bass center frequency according to the

audio source disc: 40 Hz, 50 Hz, 60 Hz, 70 Hz, 80 Hz, 100 Hz, 120 Hz, 150

Hz.

Bass Q-factor: when the Bass center is selected and adjusting the Q-factor

alters the sharpness of the Bass output, the larger the Q-factor, the sharper the

bass. Select the Bass Q-factor: 1.0, 1.25, 1.5, 2.0.

Bass DC Mode: the gain of bass below bass center frequency will increase

and the Bass Q-Factor will decrease if you select On.