Samsung UN46F8000BF manual Anynet+ HDMI-CEC Setup, Using the Anynet+ HDMI-CEC

Anynet+ (HDMI-CEC) Setup

Screen Menu > System > Anynet+ (HDMI-CEC) Try Now

Enable/disable Anynet+ (HDMI-CEC).

●● Anynet+ (HDMI-CEC): Enables/disables Anynet+ (HDMI-CEC). Disabling this turns off all Anynet+-related features. Try Now

●● Auto Turn Off: Turns off external devices when the TV is turned off. Some devices do not support this option. Try Now

●● Receiver: Listen to audio through an AV receiver instead of the TV speakers. This option is only available when there is an AV receiver connected to the TV. Try Now

Using the Anynet+ (HDMI-CEC)

You can operate external devices using just the TV remote panel.

Switching between Anynet+ Devices

111Select the virtual remote panel's TOOLS button to display the list. Select Anynet+ (HDMI-CEC)from the list. A device selection screen will appear.

222Select a device and wait for the switch to take place. This process may take up to 2 minutes to complete and cannot be cancelled when started.

"" Alternatively, switch to a different Anynet+ (HDMI-CEC) device by selecting its name from the Source list. However, Anynet+ (HDMI-CEC) cannot be used if a connected input connector is selected.