Anynet+ (HDMI-CEC)
There is something wrong with the TV.
Try this!
| Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ | |
| devices only. | |
| Only one external device may be connected to Receiver. | |
| Check if the power cord of the Anynet+ device is properly connected. | |
| Check the cable connections of the Anynet+ device. | |
Anynet+ does not | Navigate to the System menu and verify that Anynet+ | |
work. | Check whether the TV remote panel is in TV mode. | |
| Check whether the remote panel is Anynet+ compatible. | |
| Anynet+ may not function under certain circumstances. (Searching channels, | |
| operating Smart Hub or Setup, etc.) | |
| If you have disconnected and then reconnected the HDMI cable, scan for devices | |
| again or turn your TV off and on. | |
|
| |
| Check if the Anynet+ device is properly connected to the TV and then navigate to | |
I want to start | the System menu to see if Anynet+ | |
Anynet+. | After checking, select the virtual remote panel's TOOLS button to display the list. | |
| Select Anynet+ | |
|
| |
I want to exit Anynet+. | Select View TV from the Anynet+ menu. | |
Select a | ||
| ||
|
| |
The message |
| |
"Connecting to | You cannot use the remote panel when you are configuring Anynet+ or switching | |
Anynet+ device..." | ||
to a viewing mode. Use the remote panel after the TV has completed the Anynet+ | ||
or "Disconnecting | ||
configuration or has switched to a viewing mode. | ||
from Anynet+ device" | ||
| ||
appears on the screen. |
| |
|
| |
The Anynet+ device | You cannot use the play function when Setup is progress. | |
won't play. | ||
| ||
|
| |
| Check whether the device supports Anynet+. | |
| Check whether the HDMI cable is properly connected. | |
| Navigate to the System menu and verify that Anynet+ | |
The connected device | Scan for Anynet+ devices again. | |
Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the | ||
is not displayed. | ||
device is connected to your TV with an HDMI cable. Some HDMI cables may not | ||
| ||
| support Anynet+. | |
| If the connection is terminated because there has been a power failure or the HDMI | |
| cable has been disconnected, please scan for the device again. | |
|
| |
The TV audio is not | Connect an optical cable to the TV and the receiver. | |
ARC enables digital sound to be output via the HDMI (ARC) port. | ||
being played through | ||
However, ARC is only available when the TV is connected to an audio receiver that | ||
the receiver. | ||
supports ARC. | ||
| ||
|
|