Emerson KF140TZ00 Installed as described above, or fan, Wobble could result, Adapter holder

Page 4

!WARNING

It is critical that the clevis pin in the motor coupling is properly installed and the setscrew securely tightened. Failure to verify that the pin and setscrew are properly installed (as shown in Figure 3) could result in the fan falling.

5. Reinstall the hanger ball (Figure 5) on the downrod as follows. Route the three 80” motor leads through the hanger ball and slide the hanger ball over the downrod. Position the pin through the two holes in the downrod and align the hanger ball so the pin is captured in the groove in the top of the hanger ball. Pull the hanger ball up tight against the pin and securely tighten the

10-24 X 9mm TRUSS HEAD SCREW (4)

FIBER WASHER (4)

FAN BLADE

BLADE FLANGE

11. Partially install two 8-32 x 12mm pan head screws (supplied) in two thread- ed holes in the adapter holder (Figure 8).

LIGHT FITTER

LIGHT FITTER

WHITE WIRE

BLACK WIRE

 

MOTOR

 

HAIRPIN CLIP

DOWNROD

setscrew in the hanger ball. A loose setscrew could create fan wobble.

!WARNING

It is critical that the pin in the hanger ball is properly installed and the

Figure 6

BLACK WIRE

 

ADAPTER

 

HOLDER

MOTOR

 

WHITE WIRE

SETSCREW (2)

Figure 3

MOTOR

COUPLING

CLEVIS PIN

setscrew securely tightened. Failure to verify that the pin and setscrew are properly installed could result in the fan falling.

CEILING

PIN

HANGER BALL

COVER

8. Turn the fan motor and housing assem-

8-32 x 12mm PAN HEAD

bly upside down in preparation for

SCREWS (2)

mounting the fan blade assemblies.

Figure 8

Remove and discard the three shipping

retainers securing the motor hub in the

12. Connect the white wire from the light

motor housing.

 

3. Tighten the setscrews (Figure 3) secure-

ly while pulling up on the downrod.

SETSCREW

NOTE: The setscrews must be properly

DOWNROD

installed as described above, or fan

 

wobble could result.

 

4. Make sure the grommet is properly

 

installed in the coupling cover, then

 

slide the coupling cover on the down-

 

rod until it rests on the motor housing.

 

Place the ceiling cover over the down-

Figure 5

rod. Be sure that the ceiling cover and

6. The fan comes with blue, orange, black

the coupling cover are both oriented

and white leads that are 80” long.

correctly (Figure 4).

Before installing the fan, measure up

CEILING COVER

approximately 6 to 9-inches above top

DOWNROD

NOTE: Take care not to scratch the fan

fitter to the white wire from the motor

(Figure 8). Connect the black wire

housing when installing the blade

from the light fitter to the black wire

assemblies.

from the motor. Make sure both con-

9. Insert a 1/4-20 x 11mm pan head screw

nectors are securely engaged.

with lockwasher into each of the two

CAUTION: Do not pinch wires between

recessed holes in one of the blade

the adapter/light fitter assembly and

flanges.

the adapter holder.

10. Position the blade flange on the motor

13. Position the adapter/light fitter assem-

hub so that the screws in the blade

bly on the adapter holder so that the

flange align with the two threaded

two 8-32 x 12mm screws in the holder

holes in the motor hub (Figure 7).

protrude through the keyhole slots in

Tighten the two screws securely.

the adapter (Figure 9). Turn the

Repeat this procedure for the remain-

adapter counterclockwise and then

ing four blade assemblies.

tighten the two screws. Securely install

of hanger ball/downrod assembly. Cut

off excess leads and strip back insula-

tion 1/2” from end of leads.

BLADE FLANGE

another 8-32 x 12mm pan head screw into the remaining hole in the adapter holder.

 

7. Mount the fan blades to the blade

COUPLING

flanges using four

10-24 x 9mm truss

COVER

head screws and

four fiber washers

GROMMET

(supplied) (Figure 6).

NOTE: If necessary, grasp the light fit- ter and gently turn slightly to gain access to the screw heads.

INSTALL 8-32 x 12mm

Figure 4

6

!WARNING

To reduce the risk of personal injury, do not bend the blade flange when installing the blade flanges, balanc- ing the blades or cleaning the fan. Do not insert foreign objects in between rotating fan blades.

1/4-20 x 11mm PAN HEAD SCREW WITH LOCKWASHER (2)

MOTOR HUB

Figure 7

LIGHT FITTERPAN HEAD SCREW ASSEMBLY

ADAPTER

 

Figure 9

TIGHTEN TWO PAN

7

HEAD SCREWS

 

 

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Contours Safety Instructions Additional Safety Instructions for InstallationTools Needed for Assembly MaterialsPreset Memory Feature Installation of BatteryHow to Assemble Your Ceiling Fan Setting Operating Frequency of Transmitter ReceiverInstalled as described above, or fan Housing when installing the bladeAdapter/light fitter assembly Wobble could resultHow to Hang Your Ceiling Fan How to Wire Your Ceiling FanInstallation Storage Bracket Operating Your Ceiling FanMaintenance Accessories Trouble ShootingImportant Care Instructions Trouble Probable Cause Suggested RemedyPart Numbers Repair Parts Repair Parts ListingModel No Description Limited Warranty

KF140TZ00 specifications

The Emerson KF140TZ00 is a versatile and highly efficient refrigeration solution designed for various commercial and industrial applications. This model stands out due to its innovative technologies and robust characteristics, making it a reliable choice for businesses that require consistent performance in temperature control.

One of the key features of the KF140TZ00 is its advanced compressor technology. Equipped with a highly efficient scroll compressor, this unit minimizes energy consumption while maximizing cooling performance. The compressor design contributes to reduced noise levels and extended reliability, ensuring that it operates quietly and efficiently even under heavy loads.

The KF140TZ00 also incorporates state-of-the-art electronic controls, allowing for precise temperature management and real-time monitoring. These controls enable users to easily set and adjust temperature settings according to their specific needs. Furthermore, the unit is equipped with a user-friendly digital display that provides valuable information at a glance, enhancing usability and operational convenience.

To ensure optimal performance, the KF140TZ00 features a robust refrigeration system that includes high-quality evaporators and condensers. This design maximizes heat exchange efficiency, resulting in faster cooling times and lower energy costs. The unit's enhanced heat exchange capabilities also help in maintaining stable temperatures within the refrigerated space, which is essential for preserving perishable items.

Durability is another notable characteristic of the KF140TZ00. Constructed with high-grade materials, this refrigeration solution is built to withstand the rigors of demanding environments. Its corrosion-resistant exterior ensures longevity, while the sturdy internal components are designed for reliable operation over extended periods.

In terms of flexibility, the KF140TZ00 offers a range of configurations and customization options. This adaptability allows it to seamlessly integrate into various commercial setups, whether as a standalone unit or part of a larger system. Businesses can choose from multiple sizes and capacities to find the perfect fit for their refrigeration needs.

Eco-friendliness is also at the forefront of the KF140TZ00's design. Operating with environmentally friendly refrigerants, it aligns with modern sustainability goals while adhering to strict regulatory standards. This makes it an excellent choice for businesses looking to reduce their carbon footprint while maintaining high operational efficiency.

In summary, the Emerson KF140TZ00 combines advanced technology, robust construction, and user-friendly features, making it a top choice for businesses seeking reliable refrigeration solutions. Its efficiency, durability, and flexibility address the diverse challenges faced in commercial refrigeration today, ensuring that it meets the needs of various industries reliably.
Top Page Image Contents