Chargingbatteryremoved, Fromthe Vehicle | Sears 200.71226 specification

CHARGINGBATTERYREMOVED

FROMTHE VEHICLE:

POSITIVENEGATIVE

BATTERY

BATTERY_CHARGER

POWER

24", 6 GAUGE CABLE

GROUNDED

POWER

OUTLET

1.Note the polarity of the battery posts by checking the identification marks on the battery: POSITIVE (POS, P or +) and NEGATIVE (NEG, N or-). The positive post is usually larger than the negative post.

2.Attach at least a 24-inch-long, 6-gauge (AWG), insulated battery cable to NEGATIVE (NEG, N or -) battery post. Rock and twist the clamp back and forth to be sure a solid electrical connection is made.

3.Connect the red (POSITIVE) output clamp to the POSITIVE battery post.

Rock and twist the clamp back and forth to be sure a solid electrical connection

is made.

4.Position yourself as far away from the battery as possible, and then connect the black (NEGATIVE) output clamp to the free end of the cable.

5.Plug the power cord into a 120V AC 2- prong wall outlet. The chargerwilt be set to the default state of REGULAR charge type, no charge rate (tester mode).

6.Press the appropriate control buttons to select the desired charge rate and charge type. Within a few seconds, the CHARGING (yellow) LED should light and the charging process should start.

If the CHECK (red) LED is on, check for correct cable connections.

7.To disconnect the charger, unplug its power cord before attempting to discon- nect the charger clamps. Then, standing away from the battery, remove the out- put clamp from the NEGATIVE battery post. Finally, remove the output clamp from the POSITIVE battery post.

8.Clean and store the charger in a dry location.

USING ENGINE START

Your battery charger can be used to jump start your car if the battery is low. Fol- low these instructions on how to use the ENGINE START feature.

IMPORTANT: Follow all safety instructions and precautions when charging your bat- tery. Wear complete eye protection and clothing protection. Charge your battery in a welt-ventilated area.

IMPORTANT: Using the ENGINE START feature WITHOUT a battery installed in the vehicle could cause damage to the vehicle's electrical system.

1.For battery connections, see page 6 and follow instructions 1 -6 of CHARG-

ING BATTERY IN THE VEHICLE. With the charger plugged in and connected to the battery of the vehicle, set the CHARGE RATE to 125A START. Only the 125A START, VOLTAGE, and CHARGING LEDs should be lit.

2.Crank the engine until it starts or 5 sec- onds passes. If engine does not start, wait 3 minutes before cranking again.

3.After the engine starts, unplug the power cord before disconnecting the output clamps from the battery.

4.Clean and store the charger in a dry location.

NOTE: During the starting sequence

listed above, the charger is set to one of three states.

1.Wait for cranking - The charger waits until the engine is actually being cranked before delivering 125 amps for engine start. The charger delivers charge at a rate of up to 15 amps while waiting and will reset if the engine is not cranked within 15 minutes. (If the charger re- sets, it sets itself for a 2A charge and REGULAR battery.) While waiting for cranking, the digital display shows the battery voltage (it can't be set to percent).

2.Cranking - When cranking is detected, the charger witl automatically deliver up to its maximum output (at least 125A) as required by the starting system for up to 5 seconds or until the engine crank- ing stops. The digital display shows a countdown of the remaining crank time

200.71226 specifications

The Sears 200.71226 is a versatile and durable multi-function electric tool that caters to both DIY enthusiasts and professional craftspeople alike. Designed for reliability and high performance, this tool offers a wide array of features that make it suitable for various tasks around the home or workshop.

One of the standout features of the Sears 200.71226 is its powerful motor, which delivers consistent performance across different applications. The motor is engineered to provide ample torque, enabling users to handle tough materials with ease, whether cutting, sanding, or grinding. This makes it an ideal tool for woodworking, metalworking, and even complex crafting projects.

The design of the Sears 200.71226 emphasizes user comfort and convenience. It boasts an ergonomic handle that reduces fatigue during prolonged use, ensuring that users can work efficiently without compromising on comfort. Additionally, the tool's lightweight structure means that users can easily maneuver it without straining their wrists or arms, making it perfect for extended projects.

Equipped with a quick-change chuck, the Sears 200.71226 allows users to easily swap out bits, blades, and attachments without the need for additional tools. This feature not only saves time but also enhances the tool's versatility, as users can switch between different functions with minimal downtime.

Another technological advantage of the Sears 200.71226 is its variable speed control. This functionality allows users to adjust the speed to suit the specific task at hand, from high-speed drilling to more controlled sanding. This control over speed ensures precision and quality in various applications, making sure that the final results meet the highest standards.

The Sears 200.71226 also incorporates safety features, such as an integrated safety switch that prevents accidental startups. This attention to safety is paramount, particularly for those who may be less experienced in handling power tools.

In summary, the Sears 200.71226 is a robust and reliable multi-function electric tool, characterized by its powerful motor, ergonomic design, quick-change chuck, variable speed control, and essential safety features. Whether you're a hobbyist or a professional, this tool is engineered to provide the performance and versatility needed to tackle a wide range of projects effectively. With its combination of quality and innovation, the Sears 200.71226 stands out as a valuable addition to any toolkit.