Sears 200.71226 owner manual Problem Possible Cause Solution

Page 15

Performance problems often can be corrected by the user. Please read through this chart for a possible solution to common problems.

PROBLEM

POSSIBLE CAUSE

SOLUTION

The battery is connected and the charger is on, but isn'tcharging.

Indicator lights are tit in an erratic manner not explained in the "Using Your Battery Charger" section.

The charger is in tester mode, not charger mode.

You might have acciden- tally activated a special diagnostic mode.

Press the CHARGE RATE button to activate charging and select a charge rate.

Make sure nothing is touching the control panel, then unplug the charger and plug it in again.

The CHECK (red) LED always flashes before the battery is completely charged.

Engine crank time is less than specified.

The green CHARGED LED lights a few minutes after connecting to the battery.

The charger may be defective.

The incorrect CHARGE TYPE may have been selected.

This will happen if the battery did not reach full charge within 24 hours. May be due to a very large battery or a bank of batteries requiring more power than a 30/12 Amp charger can deliver within 24 hours. The bat- tery may also be faulty.

Starter motor may be drawing more than 80 Amps.

The battery may be fully charged or recently charged, leaving the bat- tery voltage high enough to appear to be fully charged.

The incorrect CHARGE

TYPE may have been selected.

Return to place of pur- chase for replacement.

Reset the charger by unplugging it or briefly disconnecting it or briefly disconnecting the nega-

tive battery clip. Select the desired CHARGE

RATE and CHARGE TYPE again, if neces- sary.

Charge the battery at the 40A rate for 10 to 15

minutes then crank the engine.

If the battery is in a ve-

hicle, turn the headlights on for a few minutes

to reduce the battery voltage and try charging again.

Reset the charger by un- plugging it or briefly dis- connecting the negative battery clip. Select the desired CHARGE RATE and CHARGE TYPE again, if necessary.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Microprocessor Controlled, Fully Automatic Charging Tips Maintenance SafetyPersonal Safety UsingRemember Help US Help YOUPage IMuMRECOEMEDE AssemblingyourchargerChargingbatteryinthe VehicleNegative Grounded System Chargingbatteryremoved Using Engine StartFromthe Vehicle Engine Starting Notes Overview71226CONTROLPANEL Display Mode SwitchCharge Type Switch Charge Rate SwitchIol Mode of OperationTester and Charger Testing SequencePOWER=UP Idle Time Limit Testing After ChargingAlternator Testing Notes Page Page Problem Possible Cause Solution =33

200.71226 specifications

The Sears 200.71226 is a versatile and durable multi-function electric tool that caters to both DIY enthusiasts and professional craftspeople alike. Designed for reliability and high performance, this tool offers a wide array of features that make it suitable for various tasks around the home or workshop.

One of the standout features of the Sears 200.71226 is its powerful motor, which delivers consistent performance across different applications. The motor is engineered to provide ample torque, enabling users to handle tough materials with ease, whether cutting, sanding, or grinding. This makes it an ideal tool for woodworking, metalworking, and even complex crafting projects.

The design of the Sears 200.71226 emphasizes user comfort and convenience. It boasts an ergonomic handle that reduces fatigue during prolonged use, ensuring that users can work efficiently without compromising on comfort. Additionally, the tool's lightweight structure means that users can easily maneuver it without straining their wrists or arms, making it perfect for extended projects.

Equipped with a quick-change chuck, the Sears 200.71226 allows users to easily swap out bits, blades, and attachments without the need for additional tools. This feature not only saves time but also enhances the tool's versatility, as users can switch between different functions with minimal downtime.

Another technological advantage of the Sears 200.71226 is its variable speed control. This functionality allows users to adjust the speed to suit the specific task at hand, from high-speed drilling to more controlled sanding. This control over speed ensures precision and quality in various applications, making sure that the final results meet the highest standards.

The Sears 200.71226 also incorporates safety features, such as an integrated safety switch that prevents accidental startups. This attention to safety is paramount, particularly for those who may be less experienced in handling power tools.

In summary, the Sears 200.71226 is a robust and reliable multi-function electric tool, characterized by its powerful motor, ergonomic design, quick-change chuck, variable speed control, and essential safety features. Whether you're a hobbyist or a professional, this tool is engineered to provide the performance and versatility needed to tackle a wide range of projects effectively. With its combination of quality and innovation, the Sears 200.71226 stands out as a valuable addition to any toolkit.
Top Page Image Contents