Sears 204.3699969 Activating the Cleaning Wand, On Board AI-IACHMENTS, Attachments to Hose

OPERATION

G. ACTIVATING THE CLEANING WAND

The DESTINY e PLUS vacuum cleaner's Handle is able to turn itself into a Cleaning Wand with 10 feet of reach.

1.To activate the Cleaning Wand, first put the machine in its upright position.

2.Press the Wand Release Button located at the top of the unit behind the On/Off Switch. (Figure 9)

3.Detach the Handle from the top of the machine by pulling the Handle straight up, then pull-out the Cleaning Wand which resides inside the Hose. Any of the attachments can be now inserted into the Handle-end. (Figure 10)

4.To return the machine to its Upright Operating Mode, simply reverse the order of activity. That is: Push the Cleaning

Wand back inside the Hose. Then, engage the bottom	FIGURE9 ' "	FIGURE10
handle-hole over its mating post at the rear of the top of the
machine.

Helpful Hint

When using the Wand, the DESTINP PLUS machine can easily be moved by holding the wand in one hand and, with the other hand, grasping the Carrying Handle and tilting the machine onto its rear wheels. (Figure 11)

H. 3 ON BOARD AI-I'ACHMENTS

The DESTINY _ PLUS vacuum cleaner carries three handy attachments on its base. (Figures 1 & 12) They are:

A Crevice Tool to help you get at the most difficult nooks and crannies.

ADusting Brush so you can vacuum sofas, drapes, pillows, etc.

A Floor Nozzle with an air flow adjustment feature for cleaning either carpeted or hard floor surfaces.

The Floor Nozzle is stored on the machine in the Floor Nozzle Holster. (Figures 1 & 13)

I. ATTACHMENTS TO HOSE

The attachments can be fitted onto the end of the Cleaning Wand as per Section G, or for added versatility, inserted directly into the Hose-end as follows:

1.Activate the Cleaning Wand as per Section G.

2.Slide the Metal Tube of the Cleaning Wand as far out of the Hose as it will freely go.

FIGURE11

CREVICEDUSTINGBRUSH TOOL

RING

J \ ADJUSTMEN

FLOORNOZZLE FIGURE12

HOLSTER

'FIGURE13