Sears 113.23611 manual Making Interior Scroll Cuts, Remove, Always Turn

Page 14

you_ scrou: saw before attempting to use the saw.

4; "There is a learning curve for each person who wants to use this saw. During that period of time itis expected that some bladeswill break until you learn how to use the saw and receive the greatest benefit from the blades:

5.Best results are achieved when cutting ,,,_:_1less than one inch thick.

6.When cutting wood thicker than one inch the user must guide the wood very, very slowly into the blade and take extra care not to bend or twist the blade while Cutting in order to maximize blade life.

7.Teeth on scroll saw blades wear out and as such must be replaced frequently for best cutting results, Scroll saw blades generally stay sharp for 1/2 hour to 2 hours of

Cutting.

8. _Toget accurate cuts be prepared to compensate for the

blades' tendency to follow the wood grain as you are cutting.

9.This scroll saw is intended to cut wood or wood products only,

10i: When choOsing a blade to use with your scroll saw con- sider the following carefully.

=Very fine, narrow blades should be used to scroll cut in thin wood 1/4inch thick or less.

•To cut wood over 1/4 inch thick use wider blades.

•Most blade packages state the size or thickness of wood which that blade is intended to cut, and the radius, size of curve, which can be cut with that blade.

•Wider blades can'tcut curves as t_ghtor small as thinner blades.

•Narrower blades work well only on thinner wood material.

tl. This saw uses 5 inch long, pin end type blades only. See your Sears Catalog or Retail Store for accessory blades.

12.Blades wear faster when cutting p_ywood, which is very abrasive; when sawing wood which is thicker than the 3/_ inch blade stroke; and when sawing hardwood, or when side pressure is placed on the blade.

MAKING INTERIOR SCROLL CUTS

1.One of the features ofthis saw is that it Can be used to make

scroll cuts on the interior of a board without breaking or

Cutting into the outline or perimeter of the board.

WARNING: TOAVOID INJURY FROM ACCIDENTAL; START-

IN

'_'

"

, AND REMOVE

G, ALWAYS TURN

SWITCH_ =,OFF

 

SWITCH KEY BEFORE

REMOVING OR REPI,_CING THE

BLADE,

2:T0 make interior cuts in a board remove the Scroll saw blade

as explained in the Assembly Section.

3.Drill a ¼ inch hole in the board you will use to: make interior cuts.

4._ Place the board on the saw table with the hole in the board over the access hole in the table:

5. Install blade through hole in board and adjust blade tension.

/

/

/

BLADE GUARD REMOVED FOR PICTURE CLARITY

6.When finished making the interiorscroll cuts simply remove the blade from the blade holders, as described in the Assembly Section, and remove the board from the table.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Scroll USE Recommended Accessories Know Your Power ToolKeep Work Area Clean Ground ALL ToolsAdditionaJ safety instructions for scroll saw VingareaContents Unpacking and checking contents Knob Settingthetablefor Horizontal or BevelTional Instructions Adjust the table as necessary for your requirements To Align the Bevel IndicatorTOP of Motorwhich could Cause Noise When 3HE Removing and installing bmades ClockwiseFor Picture Guard Removed Clarity BefOre applying power, use screwdriver in slot at endHoles inframe Quantity Description Mounting the scroll saw toMounting this saw to a workbench a so,lid wood Tension Knob Blade Holder Insert Key into switchYour scrollsaw Bevel Ponter13Toturnmachineon,.place finger under switch lever Remove Switch KEY Before Removing or REPI,CING BladeMaking Interior Scroll Cuts Always TurnFlatwashers Mounting AN Auxilliary Work TableOptionalto be MADEAUX. Byworksawsurfaceuser FAILURE, Auxilliary Work Surface should not Exceed 24 x 12Alternate Method of Oiling Bearings if RE,OIL Caps are Lost Switch From Power Or LubriInternal parts Glossary of terms for woodworking Switch BlackRecommended Remedy SuggestedKey Part Description = I++ 66055 Switch & Cord STD Screw, Hex Hd /16 !8 x 7/8Bushing 60256 Key Switch 66047 Coupling, EccentricParts List for Craftsman 16-INCH Motorized Scroll SAW RVlCE

113.23611 specifications

Sears 113.23611 is a versatile portable air compressor that has gained popularity among DIY enthusiasts and professionals due to its robust performance and convenient design. This model showcases features that simplify a variety of tasks, from inflating tires to powering pneumatic tools, making it an essential addition to any toolkit.

One of the standout characteristics of the Sears 113.23611 is its oil-lubricated pump system, which enhances the compressor’s durability and efficiency. This feature not only extends the lifespan of the machine but also ensures quieter operation compared to its oil-free counterparts. The compressor delivers a maximum psi of around 125, providing ample pressure for various applications.

The Sears 113.23611 is equipped with a 3-gallon tank that allows for continuous operation while maintaining a compact profile. Its lightweight design makes it easy to transport and store, appealing to both hobbyists and professionals who require mobility in their work. The compressor also features a quick-connect coupler, which facilitates easy tool changes and reduces downtime during projects.

In terms of technology, the Sears 113.23611 is designed with user-friendly controls. The pressure gauge allows users to monitor the PSI levels accurately, while the on/off switch is conveniently located for quick access. Furthermore, the compressor's continuous duty cycle ensures uninterrupted air supply, making it an excellent choice for extended tasks.

Safety features are also a priority in the design of this air compressor. It includes a thermal overload protector that prevents overheating, a crucial aspect for prolonged usage. The sturdy construction ensures stability during operation, and the rubber feet provide added grip, reducing vibrations and enhancing safety.

Overall, the Sears 113.23611 air compressor stands out for its combination of power, portability, and user-friendly features. It is an ideal solution for those looking to accomplish a range of tasks efficiently, whether it's for home projects, automotive work, or professional applications. With its reliability and solid performance, this compressor remains a favored choice in the world of portable air compressors.
Top Page Image Contents