How to Hang Your Ceiling Fan
WARNING
The fan must be hung with at least 7' of clearance from floor to blades (Figure 11).
CEILING
AT LEAST
7'
Figure 11 | FLOOR |
|
WARNING
The outlet box and joist must be securely mounted and capable of supporting at least 50 lbs. Use only a U.L. outlet box listed as “Acceptable for Fan Support of 50 lbs. or less”.
1.Securely attach the hanger bracket to the outlet box using the two screws supplied with the outlet box. (Figure 12.)
WARNING
Hanger bracket must seat firmly against outlet box. If the outlet box is recessed, remove wall board until bracket contacts box. If bracket and/or outlet box are not securely attached, the fan could wobble or fall.
| OUTLET | |
| BOX | |
TWO SCREWS |
| |
SUPPLIED WITH | HANGER | |
OUTLET BOX | ||
BRACKET | ||
| ||
| TAB | |
Figure 12 |
|
2.Carefully lift the fan and seat the hanger ball/down- rod assembly on the hanger bracket that was just attached to the outlet box (Figure 13). Be sure the groove in the ball is lined up with the tab on the hanger bracket (Figure 12).
WARNING
Failure to seat tab in groove could cause damage to electrical wires and possible shock or fire hazard.
NOTE: CEILING COVER, |
|
SUPPLY WIRES AND | OUTLET |
FAN WIRES OMITTED | |
FOR CLARITY. | BOX |
| HANGER |
| BRACKET |
| HANGER BALL/ |
| DOWNROD |
Figure 13 | ASSEMBLY |
WARNING
To avoid possible fire or shock, do not pinch wires between the hanger ball/downrod assembly and hanger bracket.
7