Sears 113.22643 manual Belt and disc sander, Whenever Sander iS Running, Before Leaving the Sander

Page 4

safety instructions for

•Wear nonslip footwear.

•Noise levels vary widely. To avoid possible headng

damage, wear ear plugs or muffs when using sander for hours at a time.

-Sanding operations are usually dusty. Wear a dust mask along with the safety goggles.

Inspect your workplece

Make sure there are no nails or foreign objects in the part of the workpiece to be sanded.

Plan your work to avoid THROWBACKS - when the workplece catches on the sanding belt or disc and Is torn from your hands.

•Make sure there'sno debris between the workpiece and its supports.

•When sanding irregularly shaped workpieces, plan yourwork support so it will not slip and be pulled from your hands.

Use extra caution with large, very small or awkward workpieces.

Never use this tool to finish piecestoo small to hold by hand.

Use extra supports (tables, saw horses, blocks, etc.) for any workpieces large enough to tip when not held down to the table top.

NEVER use another person as a substitutefor atable extension, or as additional support for a workplece that is longer or wider than the basic sander table, or to help feed, support or pull the workpiece.

When finishing on the disc, always press the work- piece against the "Down" side of the disc. Sanding against the side coming up from under the table could damage the work by making it "chatter," or tear the work from your hands and throw it.

Sand only one workpiece at a time.

Clear everything except the workpiece and related

support devices offthe table before turning the sander

OR.

belt and disc sander

Plan the way you will hold the workpiece from start to finish.

Avoid awkward operations and hand positions where a sudden slip could cause fingers or hand to move into a sanding surface, Keepfingers away fromwherethe belt goes into the dust trap.

DON'T OVE RREAGH. Keep good footing and balance.

Keep your face and body to one side. out of line with a possible throwback.

WHENEVER SANDER iS RUNNING

WARNING: Don't let familiarity (gained from fre-

quent use of your belt and disc sander) cause a careless mistake. Acareless fraction of a second is

enough to cause a severe Injury.

Before starting yourwork, watch the sanderwhile it runs. If it makes an unfamiliar noise or vibrates a lot, stop

immediately. Tum the sander off. Unplug the sander. Do not restart until finding and correcting the problem,

Make sure the sanding disc turns counterclockwise before using the sander.

KEEP CHILDREN AWAY. Keep all visitors a safe distance from the sander. Make sure bystanders are clear of the sander and workpiece.

DON'T FORCE TOOL It will do the job better and safer at its designed rate. Press the workpiece against the sanding material only hard enough to let it sand without bogging down or binding.

Before freeing any jammed material:

oTurn switch '_FF."

Unplug the sander.

-Wait for all moving parts to stop.

BEFORE LEAVING THE SANDER:

NEVER LEAVE TOOL F_UNNING UNATTENDED. TURN POWER OFF Don't leave tool until it comes to a complete stop.

MAKE WOF_KSHOP CHILD-PROOF. Lock the shop. Disconnect master switches. Remove t heyellow switch key. Store i1away from children and others not qualified to use the tool.

Page 3 Page 5
Image 4
Page 3 Page 5
Contents RS/CRRFTSMRN Read ALL Instructions CarefullySafety instructions for Before Using the SanderBeUtand isc sander SanderBefore Each USE Inspect your sanderTo avoid injury from jams, slips or thrown pieces Plan Ahead to Protect Your EyesWhenever Sander iS Running Belt and disc sanderBefore Leaving the Sander Motor specifications and electrical requirements Wire Sizes RequiredLike the one belo LengthUnpacking and checking contents To Workbench Clamping Belt and DiSC SanderAssembly Installing Sanding DiSC and GuardInstalling Work Support Installing Table AssemblyLoosen the 3 hex head screws and adjust table Squaring Table Assembly Installing the Sanding Belt Tensioning and TrackingAuxiliary Mounting for Vertical Sanding Tension Lever Auxiliary ON-OFF Switch Before Using the Sander Plan Ahead to Protect Your Eyes HANDS, FACE, EarsBefore Each USE Maintain Tools with CareWhenever Sander is Running Inspect your workpieceBefore freeing any jammed material Complete stopBevel Sanding Positioning Belt BEDSurface Sanding on the Sanding Belt END Sanding on the Sanding BeltBasic operation Sanding Small END Surfaces on the Sanding DiscRemoving Pulley Cover Installing Drive Belt LubricationInstalling Pulley Cover Ness on pulley belt may cause belt to fail prematurelySee Maintenance Trouble Probable CauseRemedy CAT noRepair parts Parts LiST for Craftsman Belt and DiSC Sander Model Sander

113.22643 specifications

The Sears 113.22643 is a classic sewing machine that has earned a reputation for reliability and versatility among sewing enthusiasts. Modelled as a product of the mid-20th century, this machine showcases a perfect blend of traditional design and functional capabilities that appeals to both beginners and experienced crafters.

One of the main features of the Sears 113.22643 is its robust construction. Built with a steel frame, it ensures durability and stability during operation. This solid build quality allows the machine to handle a variety of fabrics, from lightweight cottons to heavier materials like denim, making it a versatile choice for garment creation, quilting, and home decor projects.

Another key characteristic is its straightforward mechanical design. The machine is equipped with a simple stitch selection feature, which allows users to easily switch between basic stitches such as straight, zig-zag, and decorative patterns. This approach caters to both novice sewers who may appreciate the ease of use as well as seasoned seamstresses who prefer a machine that can quickly adapt to different sewing techniques.

The Sears 113.22643 also includes adjustable settings for stitch length and width, providing users with greater control over their sewing projects. This customization capability is particularly useful for achieving professional-looking hems, topstitching, and various decorative finishes.

In terms of technology, the machine features a reliable drop-in bobbin system, minimizing the guesswork typically associated with threading. This design not only simplifies the setup process but also enhances the sewing experience by reducing the likelihood of thread jams and misalignments.

Additionally, the Sears 113.22643 incorporates a built-in needle threader, which proves incredibly helpful for those who may struggle with the sometimes tedious task of manually threading the needle. This practical feature allows for quicker project completion, ensuring that the sewing experience remains enjoyable.

Furthermore, the compact size of the machine makes it portable, allowing enthusiasts to easily transport it to sewing classes, workshops, or quilting retreats. The classic aesthetic appeal of the Sears 113.22643, with its vintage charm, can also serve as a nostalgic centerpiece in any sewing room.

Overall, the Sears 113.22643 stands out for its reliability, user-friendly features, and adaptable performance. It represents an excellent choice for anyone looking to embark on their sewing journey or seeking a dependable machine for their creative endeavors. Whether you're a hobbyist or an experienced sewer, the Sears 113.22643 continues to be a valuable tool in crafting functional and beautiful handmade items.
Top Page Image Contents