Sears 113.22643 manual To Workbench, Clamping Belt and DiSC Sander

Page 7

assembJy

MOUNTING BELT AND DISC SANDER

TO WORKBENCH

If belt and disc sander is to be used in a permanent location, itshould be fastened securely to afirm support- ing surface such as a workbench,

If mounting to a workbench, holes should be drilled

through supporting surface of the workbench using dimensions illustrated.

1.The u nit should be bolted securely using 5/16" screws and hex nuts (not included). Screw length should be 1-1/2" plus the thickness of the bench top.

2.Locate and markthe holeswhere belt and disc sander is to be mounted.

3.Drill (2) 3/8" diameter holes through workbench.

4.Place belt and disc sander on workbench aligning holes on base with holes drilled in workbench.

5.Insert two 5/16" screws and tighten hex nuts.

An alternate method of mounting is to fasten belt and disc sander to a mounting board. The board should be of sufficient size to avoid tipping of sander while in use. Any good grade of plywood or chipbeard with a 3/4" minimum thickness is recommended. (Thinner chip- board can break.)

CAUTION: To avoid injury from tool movement, use 5/16" or larger screws and nuts.

1.Follow instructions for mounting to workbench, sub- stituting a board 18" x 24" minimum size and using 5/16 inch flat head screws, Iockwashers, and hex nuts (not included). Screw length should be 1-1/2" plus the thickness of the mounting board.

NOTE: For proper stability, holes must be counter sunk so screw heads are flush with the bottom surface of supporting board.

CAUTION: To avoid injury from tool movement, supporting surface where belt and disc sander is mounted should be examined carefully after mount- ing to insure that no movement during use can result. If any tipping or walking Is noted, secure

workbench or supporting surface before operating belt and disc sander.

 

24 MIN.

 

OUTLINE

OF SANDER

 

_____

3/8

DIAMETER

.............

2 HOLES

r

h

9/16

ALL MEASUREMENTS ARE INCHES UNLESS OTHERWISE NOTED.

MOUNTING

HOLE

G

HOLE

CLAMPING BELT AND DiSC SANDER

TO WORKBENCH

The belt and disc sander can be clamped directly to a workbench using two (2) or more "C" clamps on base of unit (one clamp on each end of unit).

Image 7
Contents Read ALL Instructions Carefully RS/CRRFTSMRNSander Safety instructions forBefore Using the Sander BeUtand isc sanderPlan Ahead to Protect Your Eyes Before Each USEInspect your sander To avoid injury from jams, slips or thrown piecesWhenever Sander iS Running Belt and disc sanderBefore Leaving the Sander Length Motor specifications and electrical requirementsWire Sizes Required Like the one beloUnpacking and checking contents Clamping Belt and DiSC Sander To WorkbenchInstalling Table Assembly AssemblyInstalling Sanding DiSC and Guard Installing Work SupportLoosen the 3 hex head screws and adjust table Squaring Table Assembly Installing the Sanding Belt Tensioning and TrackingAuxiliary Mounting for Vertical Sanding Tension Lever Auxiliary ON-OFF Switch Maintain Tools with Care Before Using the SanderPlan Ahead to Protect Your Eyes HANDS, FACE, Ears Before Each USEComplete stop Whenever Sander is RunningInspect your workpiece Before freeing any jammed materialPositioning Belt BED Bevel SandingEND Sanding on the Sanding Belt Surface Sanding on the Sanding BeltSanding Small END Surfaces on the Sanding Disc Basic operationLubrication Removing Pulley Cover Installing Drive BeltNess on pulley belt may cause belt to fail prematurely Installing Pulley CoverCAT no See MaintenanceTrouble Probable Cause RemedyRepair parts Parts LiST for Craftsman Belt and DiSC Sander Model Sander

113.22643 specifications

The Sears 113.22643 is a classic sewing machine that has earned a reputation for reliability and versatility among sewing enthusiasts. Modelled as a product of the mid-20th century, this machine showcases a perfect blend of traditional design and functional capabilities that appeals to both beginners and experienced crafters.

One of the main features of the Sears 113.22643 is its robust construction. Built with a steel frame, it ensures durability and stability during operation. This solid build quality allows the machine to handle a variety of fabrics, from lightweight cottons to heavier materials like denim, making it a versatile choice for garment creation, quilting, and home decor projects.

Another key characteristic is its straightforward mechanical design. The machine is equipped with a simple stitch selection feature, which allows users to easily switch between basic stitches such as straight, zig-zag, and decorative patterns. This approach caters to both novice sewers who may appreciate the ease of use as well as seasoned seamstresses who prefer a machine that can quickly adapt to different sewing techniques.

The Sears 113.22643 also includes adjustable settings for stitch length and width, providing users with greater control over their sewing projects. This customization capability is particularly useful for achieving professional-looking hems, topstitching, and various decorative finishes.

In terms of technology, the machine features a reliable drop-in bobbin system, minimizing the guesswork typically associated with threading. This design not only simplifies the setup process but also enhances the sewing experience by reducing the likelihood of thread jams and misalignments.

Additionally, the Sears 113.22643 incorporates a built-in needle threader, which proves incredibly helpful for those who may struggle with the sometimes tedious task of manually threading the needle. This practical feature allows for quicker project completion, ensuring that the sewing experience remains enjoyable.

Furthermore, the compact size of the machine makes it portable, allowing enthusiasts to easily transport it to sewing classes, workshops, or quilting retreats. The classic aesthetic appeal of the Sears 113.22643, with its vintage charm, can also serve as a nostalgic centerpiece in any sewing room.

Overall, the Sears 113.22643 stands out for its reliability, user-friendly features, and adaptable performance. It represents an excellent choice for anyone looking to embark on their sewing journey or seeking a dependable machine for their creative endeavors. Whether you're a hobbyist or an experienced sewer, the Sears 113.22643 continues to be a valuable tool in crafting functional and beautiful handmade items.