Chicago Electric operating instructions Specifications, Model 91212 91214 94336 94337

•Do not make any modifications to either the Auto-Darkening Filter or the rest of the helmet, other than those specified in this manual.

Do not use any replacement parts other than those specified in this manual. Unauthorized modifications and replacement parts will void the warranty and expose the user to the risk of personal injury. Do not open or tamper with the Auto-Darkening Filter.

16.Do not place the Welding Helmet’s

Auto-Darkening Filter on a hot surface.

17.Severe personal injury and/ or blindness may occur if the user fails to follow the aforementioned warnings and/or fails to follow the operation instructions.

WARNING

Inhalation Hazard:

Welding and Plasma Cutting Produce

toxic fumes.

Exposure to welding or cutting exhaust fumes can increase the risk of developing certain cancers, such as cancer of the larynx and lung cancer. Also, some diseases that may be linked to exposure to welding or plasma cutting exhaust fumes are:

• Early onset of Parkinson’s Disease

• Heart disease • Ulcers

•Damage to the reproductive organs

•Inflammation of the small intestine or

stomach • Kidney damage

•Respiratory diseases such as emphysema, bronchitis, or pneumonia

Use natural or forced air ventilation and wear a respirator approved by NIOSH to protect against the fumes produced to reduce the risk of developing the above illnesses.

Specifications

Model	91212		91214	94336	94337
Shell Designs	Blue		Flames	Eagle	Skull
Power Source	Solar Cells			3V CR2450 battery
	(rechargeable battery included,
				(lifetime ~6,000 hours)
	no additional battery required)
Viewing Area	3.86” x 1.73”			3.74” x 2.44”
Operating Temp.	23 to 158° F			14 to 158° F
Clear State		4 DIN		3.5 DIN
Weight		1.3 lb.		1.6 lb.
Shade Range			9 to 13
Ultraviolet / Infrared Protection			up to shade 16 all the time
Welding Protection Types			For All Arc Welding Processes;
	Not for Laser Welding or Oxyacetylene Welding/Cutting
Shell Material	High Impact-Resistant Plastic Polyamide Nylon
Lens	Switching Speed (Clear to Dark): 1/25,000 second
		ANSI Z87.1-2003 - approved Lens
Power ON / OFF			Fully Automatic
Storing Temperature			-4 to 158° F

REV 06l; 09e; 09h; 10c

Page 4	For technical questions, please call 1-800-444-3353. Auto-darkening
	Welding Helmet