SAFETY
SPECIFICATIONS
13.This helmet provides protection for intended purposes only. There are certain applications for which this helmet was designed. Do not modify this helmet and do not use this helmet for a purpose for which it was not intended.
a.The Welding Helmet is not suitable for laser welding or Oxyacetylene Welding/Cutting processes.
b.The Welding Helmet will not protect against severe impact hazards.
c.The Welding Helmet will not protect against explosive devices or corrosive liquids.
14.Use only at temperatures within the operating range for your model as stated on the specifications chart in this manual.
15.Maintain the helmet and lens correctly to help ensure reliable protection.
a.Clean filter’s surfaces regularly. Keep sensors and solar cells clean using a clean
b.Should the
c.Regularly replace the Front Lens Cover if it becomes cracked, scratched, pitted, or otherwise damaged.
d.Do not make any modifications to either the Auto- Darkening Filter or the rest of the helmet, other than those specified in this manual. Do not use any replacement parts other than those specified in this manual. Unauthorized modifications and replacement parts will void the warranty and expose the user to the risk of personal injury. Do not open or tamper with the
16.Do not place the Welding Helmet’s Auto- Darkening Filter on a hot surface.
17.SEVERE PERSONAL INJURY and/or BLINDNESS may occur if the user fails to follow the aforementioned warnings and/or fails to follow the operation instructions.
18.Maintain labels and nameplates on the tool. These carry important safety information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
SAVE THESE INSTRUCTIONS.
OPERATION
MAINTENANCE
Page 4 | For technical questions, please call | Item 67854 |