3M 16961-Rev-7A manual Eye, Face, Respiratory Protection for Weld Prep/Grinding

ADF’S WITH RESPIRATORY

PROTECTION

Eye, Face and

Respiratory Protection for Weld Prep/Grinding

3M™ Speedglas™ FlexView with Adflo™ System

The new FlexView system combines full eye and face protection (for both welding and low light weld preparation) with a slim, lightweight, powered air purifying respirator. For chipping, grinding, or preparation, the user simply lifts up the spring- mounted Speedglas filter assembly. The spring holds the auto-darkening filter securely on top of the helmet, giving the welder a big clear view through the clear polycarbonate faceshield.

The faceshield allows for precision grinding and cleaning, the careful alignment of electrodes and the inspection of newly-completed welds…all with constant eye and face protection, even in dark conditions.

The faceshield meets the ANSI Z87.1-2003 industrial eye and face protection standard, which does not recommend “…filter or tinted filters that restrict light transmittance…” when chipping or grinding (American National Standard Z87.1-2003).*

*Important Note: Impact resistant, primary eye protection, spectacles or goggles that meet current ANSI specifications, must be worn at all times when using any welding helmet.

30