Adapter Assembly White Wires Adapter Plate Black

BP7284, Sturbrige, KF180 7/31/06 10:52 AM Page 7

8. Turn the fan motor and housing assem- bly upside down in preparation for mounting the fan blade assemblies. Remove and discard the three shipping retainers securing the motor hub in the motor housing.

NOTE: Take care not to scratch the fan housing when installing the blade assemblies.

9. Insert a 1/4-20 x 11mm pan head screw with lockwasher (supplied) into each of the recessed holes in one of the blade flanges.

10. Align one of the threaded holes in the motor hub with one of the slots in the adapter plate (Figure 6). Position the blade flange on the motor hub so one of the screws in the blade flange aligns with this threaded hole. Loosely tight- en the screw. Rotate the motor hub until the other flange screw can be tightened through the slot of the adapter. Repeat this procedure for the remaining four blade assemblies, then securely tighten all the screws.

ADAPTER

ASSEMBLY

WHITE WIRES

ADAPTER PLATE

BLACK

WIRES

8-32 x 12mm PAN HEAD SCREW (2)

Figure 7

12. Partially install two 8-32 x 12mm pan head screws (supplied) in two of the threaded holes in the rim of the adapter plate (Figure 7).

13. Position the two slots in the adapter/light fitter assembly over the

ADAPTER PLATE

MOTOR HUB

Figure 6

SLOT FOR FLANGE SCREW ACCESS

BLADE FLANGE

1/4-20 x 11mm PAN HEAD SCREW WITH LOCKWASHER (2)

two 8-32 x 12mm screws in the rim of the adapter plate (Figure 8). Turn the adapter/light fitter assembly counter- clockwise and tighten the screws.

INSTALL ONE 8-32 x 12mm

PAN HEAD SCREW

TIGHTEN TWO

SCREWS

11.Connect the white wire from the light fitter to the white wire from the motor (Figure 7). Connect the black wire from the light fitter to the black wire from the motor. Make sure both con- nectors are securely engaged.

ADAPTER/LIGHT

FITTER ASSEMBLY

Figure 8

14. Install another 8-32 x 12mm pan head screw in the remaining hole to secure the adapter/light fitter assembly (Figure 8).

15. You have completed the assembly of your new ceiling fan. You can now pro- ceed with hanging and wiring your fan.