How to Hang Your Ceiling Fan | Emerson CF940WB00, CF940BC00 instruction

How to Hang

Your Ceiling Fan

!WARNING

The fan must be hung with at least 7' of clearance from floor to blades (Figure 9).

CEILING

AT LEAST

Figure 9	FLOOR

!WARNING

The outlet box and joist must be securely mounted and capable of supporting at least 50 lbs. Use only a U.L. outlet box listed as “Acceptable for Fan Support”.

	NOTE: CEILING COVER,
	SUPPLY WIRES AND	OUTLET
	FAN WIRES OMITTED	OUTLET
	FAN WIRES OMITTED	BOX
	FOR CLARITY.	BOX
	FOR CLARITY.

	HANGER
	BRACKET
Figure 11	HANGER BALL/
Figure 11	DOWNROD ASSEMBLY

!WARNING

To avoid possible fire or shock, do not pinch wires between the hanger ball/downrod assembly and hanger bracket.

How to Wire

Your Ceiling Fan

If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.

!WARNING

To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked “Acceptable for Fan Support”, and use screws supplied with outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician in in doubt.

1.Securely attach the hanger bracket to the outlet box using the two screws supplied with the outlet box. (Figure 10.)

!WARNING

Hanger bracket must seat firmly against outlet box. If the outlet box is recessed, remove wall board until bracket contacts box. If bracket and/or outlet box are not securely attached, the fan could wobble or fall.

OUTLET

BOX

TWO SCREWS
SUPPLIED WITH	HANGER
OUTLET BOX	HANGER
	BRACKET
Figure 10	TAB

2.Carefully lift the fan and seat the hanger ball/ downrod assembly on the hanger bracket that was just attached to the outlet box (Figure 11). Be sure the groove in the ball is lined up with tab on the hanger bracket (Figure 10).

!WARNING

Failure to seat tab in groove could cause damage to electrical wires and possible shock or fire hazard.

!WARNING

To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. NOTE: If you are not sure if the outlet box is ground- ed, contact a licensed electrician for advice, as it must be grounded for safe operation.

1.Connect the green grounding lead from the hanger ball and the green grounding lead from the hanger bracket to the grounding conductor of supply (this may be a bare wire or wire with green colored insulation). Securely connect wires with wire con- nectors supplied. (Figure 12.)

NOTE: If you are using an Emerson Light Fixture with your fan, see Light Fixture Owner’s Manual for wiring.

!WARNING

This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or acces- sories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage.

2.Securely connect the fan motor white wire to the supply white (neutral) wire using wire connector supplied (Figure 12). Securely connect the fan motor black wire and blue wire to the supply black (hot) wire using wire connector supplied (Figure 12). After connections have been made, turn leads upward and carefully push leads into the outlet box, with the white and green leads on one side of the outlet box and the black and blue leads on the other side of the outlet box.

CF940SCK00, CF940AB00, CF940PW00, CF940AW00, CF940BC00 specifications

The Emerson CF940 series fans, including models CF940WB00, CF940AW00, CF940SCK00, CF940AB00, and CF940PW00, are a testament to advanced engineering and thoughtful design in home appliance technology. These ceiling fans are meticulously crafted to enhance the comfort of any living space, whether it’s a cozy living room or a spacious deck.

One of the standout features of these fans is their aerodynamic blade design, which optimizes airflow while minimizing noise. Each model in the series is equipped with high-performance blades that ensure efficient air circulation, providing a refreshing breeze regardless of the room size. The Emerson CF940 series fans also boast a powerful motor, delivering a robust airflow that effectively cools down even the warmest of spaces.

The CF940 models come with a stylish and versatile design, making them suitable for a range of interior designs. The available finishes, such as Walnut, Antique White, and Satin Black, ensure that these fans can blend seamlessly with existing decor, enhancing the overall aesthetic of each room. The fans also incorporate integrated LED lighting, offering a dual function that provides both illumination and cooling comfort, thus eliminating the need for additional light fixtures.

In addition to their aesthetic appeal, the Emerson CF940 series fans are equipped with advanced energy-efficient technology, which helps reduce electricity costs while maintaining optimal performance. Many of the models come with multiple speed settings, allowing users to easily adjust the airflow according to their preferences and the weather conditions. Some versions also support remote control operation, providing convenience and ease of use, eliminating the need to get up from a comfortable spot to adjust the fan’s settings.

Another significant characteristic of the Emerson CF940 series is its focus on durability and reliability. Built with high-quality materials and rigorous testing standards, these fans are designed to stand the test of time, ensuring that you receive both style and functionality. With a range of sizes available, it’s easy to find the perfect fit for any room.

In summary, the Emerson CF940 series fans—CF940WB00, CF940AW00, CF940SCK00, CF940AB00, and CF940PW00—combine superior airflow, stylish designs, energy efficiency, and advanced technologies, making them a wise choice for anyone looking to enhance their living environment with a reliable and elegant ceiling fan.