How to Put Your Ceiling Fan Together

1.Remove the hanger ball by loosening the setscrew in the hanger ball until the ball falls freely down the downrod (Figure 1). Remove the pin from the downrod, then remove the hanger ball. Retain the pin and hanger ball for reinstallation in step 5.

HANGER

BALL

DOWNROD

SETSCREW

Figure 1

2.Unscrew the setscrew (Figure 2) until it clears the inside of the motor coupling. Then separate, untwist and unkink the three 80” motor leads. Route the motor lead wires through the downrod. Align the clevis pin holes in the downrod with the holes in the motor coupling. Install the clevis pin and secure with the hairpin clip (Figure 2). The clevis pin must go through the holes in the motor coupling and the holes in the downrod. Be sure to push the straight leg of the hairpin clip through the hole near the end of the clevis pin until the curved portion of the hairpin clip snaps around the clevis pin. The hairpin clip must be properly installed to prevent the clevis pin from working loose. Pull on the downrod to make sure the clevis pin is properly installed.

!WARNING

It is critical that the clevis pin in the motor coupling is properly installed and the setscrew securely tight- ened. Failure to verify that the pin and setscrew are properly installed (as shown in Figure 2) could result in the fan falling.

MOTOR

COUPLING

	HAIRPIN	SETSCREW
		CLEVIS PIN
	CLIP

4.Make sure the grommet is properly installed in the coupling cover, then slide the coupling cover on the downrod until it rests on the motor housing. Place the ceiling cover over the downrod. Be sure that the ceiling cover and the coupling cover are both oriented correctly (Figure 3).

CEILING

COVER

DOWNROD

COUPLING COVER

Figure 3

5.Reinstall the hanger ball (Figure 4) on the downrod as follows. Route the three 80” motor leads through the hanger ball. Position the pin through the two holes in the downrod and align the hanger ball so the pin is captured in the groove in the top of the hanger ball. Pull the hanger ball up tight against the pin and securely tighten the setscrew in the hanger ball. A loose setscrew could create fan wobble.

!WARNING

It is critical that the pin in the hanger ball is properly installed and the setscrew securely tightened. Failure to verify that the pin and setscrew are proper- ly installed could result in the fan falling.

HANGER	PIN
BALL

SETSCREW

DOWNROD

HAIRPIN CLIP

DOWNROD

CLEVIS

CEILING COVER

Figure 4

6. The fan comes with blue, black and white leads

MOTOR COUPLING

SETSCREW

Figure 2

3.Tighten the setscrew (Figure 2) securely while pulling up on the downrod.

NOTE: The setscrew must be properly installed as described above, or fan wobble could result.

that are 80-inches long. Before installing the fan,

measure up approximately 6 to 9-inches above top

of hanger ball/downrod assembly. Cut off excess

leads and strip back insulation 1/2-inch from end of

leads.

7. Mount blade flanges to fan blades using three

3/16-24 x 5/16” slotted Phillips head screws and

three blade washers (Figure 5).

CF940SCK00, CF940AB00, CF940PW00, CF940AW00, CF940BC00 specifications

The Emerson CF940 series fans, including models CF940WB00, CF940AW00, CF940SCK00, CF940AB00, and CF940PW00, are a testament to advanced engineering and thoughtful design in home appliance technology. These ceiling fans are meticulously crafted to enhance the comfort of any living space, whether it’s a cozy living room or a spacious deck.

One of the standout features of these fans is their aerodynamic blade design, which optimizes airflow while minimizing noise. Each model in the series is equipped with high-performance blades that ensure efficient air circulation, providing a refreshing breeze regardless of the room size. The Emerson CF940 series fans also boast a powerful motor, delivering a robust airflow that effectively cools down even the warmest of spaces.

The CF940 models come with a stylish and versatile design, making them suitable for a range of interior designs. The available finishes, such as Walnut, Antique White, and Satin Black, ensure that these fans can blend seamlessly with existing decor, enhancing the overall aesthetic of each room. The fans also incorporate integrated LED lighting, offering a dual function that provides both illumination and cooling comfort, thus eliminating the need for additional light fixtures.

In addition to their aesthetic appeal, the Emerson CF940 series fans are equipped with advanced energy-efficient technology, which helps reduce electricity costs while maintaining optimal performance. Many of the models come with multiple speed settings, allowing users to easily adjust the airflow according to their preferences and the weather conditions. Some versions also support remote control operation, providing convenience and ease of use, eliminating the need to get up from a comfortable spot to adjust the fan’s settings.

Another significant characteristic of the Emerson CF940 series is its focus on durability and reliability. Built with high-quality materials and rigorous testing standards, these fans are designed to stand the test of time, ensuring that you receive both style and functionality. With a range of sizes available, it’s easy to find the perfect fit for any room.

In summary, the Emerson CF940 series fans—CF940WB00, CF940AW00, CF940SCK00, CF940AB00, and CF940PW00—combine superior airflow, stylish designs, energy efficiency, and advanced technologies, making them a wise choice for anyone looking to enhance their living environment with a reliable and elegant ceiling fan.