About This Guide

Thank you for purchasing Pelco’s Endura® workstation with WS5000 advanced system software version 2.0. This guide provides basic instructions on how to connect your Endura workstation, start the software, monitor live video, and work with recorded video.

For detailed instructions on installing, programming, and using your Endura workstation, refer to the installation and operation manuals included with your unit.

Connecting the Equipment

Refer to Figure 1 as you make the front and back panel connections required to operate this unit:

1.Connect video output (DVI). To connect a VGA monitor to this output, use a DVI-to-VGA adapter plug supplied with the Endura workstation.

2.Connect the audio input and output.

3.Connect Cat5e or better network cable to the 1 gigabit RJ-45 network port and to the Endura network.

4.Connect the keyboard and mouse to USB ports (front or back panel).

5.Connect the power cable to the power connector and a power source. Turn on the power switch.

6.Turn on power.

7.Check the Network Activity indicator.

8.Check the Unit Status indicator.

POWER CONNECTOR WITH ON/OFF SWITCH

USB 2.0 PORTS

NETWORK

CONNECTOR (RJ-45)

DIGITAL VIDEO (DVI) CONNECTORS

POWER INDICATOR

MICROPHONE IN

AUDIO OUT

AUDIO IN

DVD/CD

DRIVE

POWER BUTTON

NETWORK

ACTIVITY

PRODUCT SERIAL NUMBER STICKER

03267-39-0020

UNIT STATUS

CONFIGURATION/

RESET BUTTON

USB 2.0 PORT

Figure 1. Connecting the Endura Workstation

2	C4600M (3/09)