How to Hang Your Ceiling Fan

!WARNING

The fan must be hung with at least 7' of clearance from floor to blades (Figure 9).

CEILING

AT LEAST

Figure 9	FLOOR

!WARNING

The outlet box must be securely anchored and capable of withstanding a load of at least 50 lbs.

!WARNING

To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked acceptable for fan support, and use screws supplied with outlet box. Most outlet boxes commonly used for support of light fixtures are not acceptable for fan support and may need to be replaced. Consult a qualified electrician in in doubt.

1.Securely attach the hanger bracket to the outlet box using the two screws supplied with the outlet box. (Figure 10.)

!WARNING

Hanger bracket must seat firmly against outlet box. If the outlet box is recessed, remove wall board until bracket contacts box. If bracket and/or outlet box are not securely attached, the fan could wobble or fall.

OUTLET

BOX

TWO SCREWS
SUPPLIED WITH	HANGER
OUTLET BOX	HANGER
	BRACKET
Figure 10	TAB

2.Carefully lift the fan and seat the hanger ball/ downrod assembly on the hanger bracket that was just attached to the outlet box (Figure 11). Be sure the groove in the ball is lined up with tab on the hanger bracket (Figure 10).

!WARNING

Failure to seat tab in groove could cause damage to electrical wires and possible shock or fire hazard.

	NOTE: CEILING COVER,
	SUPPLY WIRES AND	OUTLET
	FAN WIRES OMITTED	OUTLET
	FAN WIRES OMITTED	BOX
	FOR CLARITY.	BOX
	FOR CLARITY.

	HANGER
	BRACKET
Figure 11	HANGER BALL/
Figure 11	DOWNROD ASSEMBLY

!WARNING

To avoid possible fire or shock, do not pinch wires between the hanger ball/downrod assembly and hanger bracket.

How to Wire Your Ceiling Fan

If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician.

!WARNING

To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. NOTE: If you are not sure if the outlet box is ground- ed, contact a licensed electrician for advice, as it must be grounded for safe operation.

1.Connect the green grounding lead from the hanger ball and the green grounding lead from the hanger bracket to the grounding conductor of supply (this may be a bare wire or wire with green colored insulation). Securely connect wires with wire con- nectors supplied. (Figure 12.)

NOTE: If you are using an Emerson Light Fixture with your fan, see Light Fixture Owner’s Manual for wiring.

!WARNING

This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Company. Substitution of parts or acces- sories not designated for use with this product by Emerson Company could result in personal injury or property damage.

2.Securely connect the fan motor white wire to the supply white (neutral) wire using wire connector supplied (Figure 12). Securely connect the fan motor black wire and blue wire to the supply black (hot) wire using wire connector supplied (Figure 12). After connections have been made, turn leads upward and carefully push leads into the outlet box, with the white and green leads on one side of the outlet box and the black and blue leads on the other side of the outlet box.

CF942TG00, CF942SB00, CF942OB00, CF942BS00, CF942HTW00 specifications

The Emerson CF942 series of ceiling fans consists of various models, including CF942WB00, CF942HTW00, CF942BS00, CF942OB00, and CF942SB00. These fans are renowned for their elegant designs, energy efficiency, and cutting-edge features, making them an ideal choice for enhancing the comfort and aesthetics of any living space.

One of the main features of the CF942 series is its innovative motor technology. The fans are equipped with powerful and efficient motors that ensure quiet operation while providing optimal airflow. This makes them suitable for bedrooms, living rooms, and even larger spaces where comfort is essential. The motors also contribute to extended durability, reducing the need for maintenance over time.

Another characteristic of the Emerson CF942 series is the variety of finish options available. Each model comes in distinct colors, including a sleek white (CF942HTW00), a rich bronze (CF942BS00), an elegant oil-rubbed bronze (CF942OB00), and a classic black (CF942SB00). This diverse range of finishes allows homeowners to select a fan that seamlessly blends into their decor, whether it be modern, traditional, or rustic.

In terms of size, the CF942 fans are designed to fit various room dimensions, making them versatile options for different applications. The streamlined design of the blades ensures maximum airflow efficiency while maintaining a stylish appearance. Additionally, the fans often come with a standard downrod for easy installation and can be mounted on flat or angled ceilings, providing flexibility.

The CF942 models also typically feature a convenient remote control, allowing users to adjust fan speed and lighting effortlessly from anywhere in the room. Some models may include integrated LED lighting, which further enhances their appeal by providing both illumination and energy savings.

Installation is straightforward, and the user-friendly design ensures that even those with minimal DIY skills can set up their new ceiling fan with ease. Overall, the Emerson CF942 series combines functionality, style, and technology to create ceiling fans that are perfect for enhancing the comfort of any home environment. With a focus on quality and efficiency, these fans are an investment that will provide lasting satisfaction for years to come.