Using Your Ceiling Fan, Maintenance | Emerson CF942TG00, CF942OB00

GROUND

WIRE

LISTED

BLACK AND BLUE FAN WIRES

5. Secure the ceiling cover in place by sliding lockwash-

ers over the threaded studs and installing the two

knurled knobs (supplied). (Figure 13.) Tighten the

knurled knobs securely until the ceiling cover fits

WIRE

CONNECTOR (3)

GREEN WIRE (GROUND) FROM HANGER BRACKET

GREEN WIRE (GROUND) FROM HANGER BALL

WHITE SUPPLY (NEUTRAL)

WHITE FAN

WIRE

BLACK SUPPLY (HOT)

snugly against the ceiling and the hole in the ceiling

cover is clear of the downrod. Your fan is now wired to

be turned on and off from the fan switch.

CEILING COVER

		NOTE: CEILING COVER
Figure 12		NOTE: CEILING COVER
Figure 12		OMITTED FOR CLARITY.
		OMITTED FOR CLARITY.

		! WARNING

Check to see that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire. Do not operate fan until blades are in place. Noise and fan damage could result.

3.Screw the two threaded studs (supplied) into the tapped holes in the hanger bracket.

4.Lift the ceiling cover up to the threaded studs and turn until studs protrude through the holes in the ceiling cover (Figure 13).

THREADED STUD LOCKWASHERS (2) KNURLED KNOB

Figure 13

!WARNING

To avoid possible fire or shock, make sure that the electrical wires are completely inside the outlet box and not pinched between the ceiling cover and the ceiling.

6.Cut the 3-speed switch pull chain to a desired length (optional). Connect the wood pendant (sup- plied) to the 3-speed switch pull chain by sliding the wooden pendant (small hole first) onto the pull chain. Attach the chain coupler to the end of the chain and allow the wooden pendant to fall down over the coupling.

Using Your Ceiling Fan

1.Restore electrical power to the outlet box by turning the electricity on at the main fuse box.

2.Check the operation of the fan by gently pulling on the pull chain switch.

3.All fans are shipped from the factory with the reversing switch positioned to circulate air down- ward. If airflow is desired in opposite direction, turn your fan off and wait for the blades to stop turning, then slide the reversing switch to opposite position, and turn fan on again. The fan blades will turn in the opposite direction and reverse the airflow.

Your fan model is equipped with a 4-position, 3-speed pull chain switch. The operating sequence is as follows:

THREE-SPEED

1st Pull—HIGH		SPEED CONTROL
1st Pull—HIGH		SWITCH PULL
2nd Pull—Medium	REVERSING	CHAIN
2nd Pull—Medium	SWITCH
	SWITCH
3rd Pull—Low
4th Pull—OFF

Maintenance

IMPORTANT CARE INSTRUCTIONS

for your Ceiling Fan

Periodic cleaning of your new ceiling fan is the only maintenance that is needed.

When cleaning, use only a soft brush or lint free cloth to avoid scratching the finish.

Abrasive cleaning agents are not required and should be avoided to prevent damage to finish.

!WARNING

Do not use water when cleaning your ceiling fan. It could damage the motor or the blades and create the possibility of an electrical shock.

Accessories

1.Ceiling Fan Light Kits (see store or catalog).

2.Ceiling Fan/Light Controls (see store or catalog).

3.Downrod Extension Kits (see store or catalog).

!WARNING

The use of any other control not specifically approved for this fan could result in fire, shock and personal injury.

!WARNING

This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Company. Substitution of parts or acces- sories not designated for use with this product by Emerson Company could result in personal injury or property damage.

CF942TG00, CF942SB00, CF942OB00, CF942BS00, CF942HTW00 specifications

The Emerson CF942 series of ceiling fans consists of various models, including CF942WB00, CF942HTW00, CF942BS00, CF942OB00, and CF942SB00. These fans are renowned for their elegant designs, energy efficiency, and cutting-edge features, making them an ideal choice for enhancing the comfort and aesthetics of any living space.

One of the main features of the CF942 series is its innovative motor technology. The fans are equipped with powerful and efficient motors that ensure quiet operation while providing optimal airflow. This makes them suitable for bedrooms, living rooms, and even larger spaces where comfort is essential. The motors also contribute to extended durability, reducing the need for maintenance over time.

Another characteristic of the Emerson CF942 series is the variety of finish options available. Each model comes in distinct colors, including a sleek white (CF942HTW00), a rich bronze (CF942BS00), an elegant oil-rubbed bronze (CF942OB00), and a classic black (CF942SB00). This diverse range of finishes allows homeowners to select a fan that seamlessly blends into their decor, whether it be modern, traditional, or rustic.

In terms of size, the CF942 fans are designed to fit various room dimensions, making them versatile options for different applications. The streamlined design of the blades ensures maximum airflow efficiency while maintaining a stylish appearance. Additionally, the fans often come with a standard downrod for easy installation and can be mounted on flat or angled ceilings, providing flexibility.

The CF942 models also typically feature a convenient remote control, allowing users to adjust fan speed and lighting effortlessly from anywhere in the room. Some models may include integrated LED lighting, which further enhances their appeal by providing both illumination and energy savings.

Installation is straightforward, and the user-friendly design ensures that even those with minimal DIY skills can set up their new ceiling fan with ease. Overall, the Emerson CF942 series combines functionality, style, and technology to create ceiling fans that are perfect for enhancing the comfort of any home environment. With a focus on quality and efficiency, these fans are an investment that will provide lasting satisfaction for years to come.