Univex HF-251 Control Panel, Genuine Miller Options and Accessories, Ordering Information

Control Panel

1
2	4	1.	Pilot Light
		2.	Power Switch
		3.	High Frequency Switch
		4.	High Frequency
3			Selector Switch
	5	5.	High Frequency

Intensity Control

Typical Installations
Denotes Plug (Threaded Collar)		Denotes Receptacle (External Threads)
1 ft (305 mm)	Optional Extension Cords	6 ft (1.8 m) Cord
Adapter Cord	(See Options and Accessories	Supplied with HF-251	Remote
(#129 341)	for Lengths Available.)		TIG Torch
Miller Power
Source	Electrode Cable	HF-251
with 5-Socket			Work
Receptacle	Work Cable

To 115 Volt Supply – 10 ft (3 m)

Optional Extension Cords		6 ft (1.8 m) Cord
(See Options and Accessories			Remote
		Supplied with HF-251
for Lengths Available.)
			TIG Torch
Miller Power
Source	Electrode Cable	HF-251
with 14-Socket			Work
Receptacle	Work Cable

To 115 Volt Supply – 10 ft (3 m)

Genuine Miller Options and Accessories

Secondary Contactor

Kit

For HF-251D-1 model #041 969 Field only For HF-251-2 model #041 906 Field only

Mounts inside HF-251 cabinet. For use with a power source that does not have its own contactor.

Remote Controls and Switches

Controls listed below are for use with Miller constant- current power sources with solid-state output control. The controls are used when remote current control is desired. The HF-251 is equipped with a 14-pin plug on a 6 ft (1.8 m) cord for direct connection to new Miller

CCpower sources. An adapter cord will be required for older Miller equipment with 5-socket receptacles.

RMLS-14 #129 337

Momentary- and maintained-contact rocker switch. 20 ft (6 m) cord with 14-pin plug.

RCC-14 #151 086

Attaches to the TIG torch handle to provide contactor and current control. Includes 28 ft (8.5 m) cord and 14-pin plug prewired.

RHC-14 #129 340

Miniature remote hand current and contactor control. Includes 20 ft (6 m) cord and 14-pin plug.

RFCS-14 #043 554 Foot pedal current and contactor control. Includes 20 ft (6 m) cord and 14-pin plug.

Extension Cords

#122 973 25 ft (7.6 m) #122 974 50 ft (15 m) #122 975 75 ft (23 m)

Extends HF-251 farther from power source or extends remote control farther from HF-251.

Adapter Cord #129 341

1 ft (305 mm) cord with 5-pin and 14-pin plugs for use between 5-socket receptacle power source and HF-251.

Adapter Cord #041 947

1 ft (305 mm) cord with 14-pin plug and 5-socket receptacle for use between HF-251 and 5-pin remote controls.

Water Coolant Systems

Coolmate™ 3

#043 007 115 VAC #043 008 230 VAC

Delivers cooling capacity for torches rated up to 600 A.

Coolmate™ V3 #043 009 115 VAC Cools torches rated up to 500 A.

Coolmate™ 4 #042 288 115 VAC

Cools torches and guns rated up to 600 A.

For use with water-cooled guns. Refer to Literature Index No. AY/7.2 for additional coolant system information.

Typical TIG (GTAW) Torches

Air-cooled Torches #WP-17-25-2 (150 Amp) #WP-26-25-2 (200 Amp)

Water-cooled Torches (Requires 45VII Adapter)

#WP-18-25-R (350 Amp) #WP-20-25-R (250 Amp)

Ordering Information

Power Source and Options	Stock No.	Description			Qty.	Price
HF-251D-1	#042 388	115	V, 50/60/100 Hz
HF-251-2	#042 387	230	V, 50/60 Hz
Secondary Contactor Kit	#041 969	For HF-251D-1 model. Field only
	#041 906	For HF-251-2 model. Field only
Date:				Total Quoted Price:

Distributed by:

Litho in USA