Hardware Installation | TRENDnet TEW-691GR 1.01 guide

2. Hardware Installation

Note:

Gather all information related to your Internet Connection before you start. If necessary, contact your Internet Service Provider (ISP).

1.Verify that you have an Internet connection when connecting your computer directly to the Cable or DSL modem or Ethernet jack. For example, open your browser (e.g. Internet Explorer) and type in a URL (e.g. http://www.trendnet.com) in the address bar.

2.Power down your Cable or DSL modem and disconnect the RJ-45 cable from your computer to the TEW-691GR's WAN port. The other end of the cable should remain connected to your Cable or DSL modem.

3.Connect one end of the provided RJ-45 cable to one of the TEW-691GR’s LAN ports. Connect the other end of the cable to the computer’s Ethernet port.

4.Connect the AC Power Adapter to the TEW-691GR and then to a power outlet. Power up your Cable or DSL modem.

5.Move the power switch to the On position.

6.Verify that the following panel lights are on:

Power (on), LAN (blinking), WAN (blinking) and WLAN (blinking).

Internet

Cable/DSL Modem