TRENDnet TRENDnet Wireless Router, TEW-691GR 1.01 manual Troubleshooting, Windows Vista

Page 7

Troubleshooting

1.I typed http://192.168.10.1 in my Internet Browser's Address Bar, but an error message says “The page cannot be displayed.” How can I get into the TEW-691GR's web configuration page?

1.Check your hardware settings again by following the instructions in Section 2.

2.Make sure the LAN and WLAN lights are lit.

3.Make sure your TCP/IP settings are set to Obtain an IP address automatically (see the steps below).

4.Press on the factory reset button for 15 seconds.

Windows 7

1.Go into the Control Panel, click Network and Sharing Center, click Change Adapter Settings and then right-click the Local Area Connection icon and then click Properties.

2.Click Internet Protocol Version 4(TCP/IPv4) and then click Properties. Then click on

Obtain an IP address automatically.

Windows Vista

1.Go into the Control Panel, click Network and Internet, click Network and Sharing Center, click Manage Network Connections and then right-click the Local Area Connection icon and then click Properties.

2.Click Internet Protocol Version 4(TCP/IPv4) and then click Properties. Then click on

Obtain an IP address automatically.

5

Image 7
Contents TEW-691GR Table of Contents Before You Start Package ContentsSystem Requirements Hardware Installation Type Configure the wireless routerYour Configuration is complete Register Your Product Windows TroubleshootingWindows Vista Windows XP/2000 Page Page Page Page Copyright 2010. All Rights Reserved. TRENDnet