Troy-Bilt 01919-1 owner manual Assembly, Before Starting the Engine, Add Engine Oil, Add Fuel

Page 7

Section 3: Assembly

7.Tip generator so that engine side is down.

8.Line up holes in support leg with holes in generator frame.

9.Attach support leg using two short (M8 x 16mm) cap screws and two locking hex nuts.Tighten with a 1/2” or 13mm socket and wrench.

10.On support leg end of generator, slide handle onto center of top of frame.

11.Attach handle using two long (M8 x 45mm) cap screws and two locking hex nuts.Tighten with a 1/2” or 13mm socket and wrench.

12.Return generator to normal operating position (resting on wheels and support leg).

13.Check that tires are inflated to value marked on tire or within 15 and 40 psi.

BEFORE STARTING THE ENGINE

Add Engine Oil

•Move generator to a flat, level surface.

•Refer to engine owner’s manual and follow oil recommendations and instructions.

CAUTION

Any attempt to crank or start the engine before it has been properly filled with the recommended oil will result in equipment failure.

•Refer to engine manual for oil fill information.

•Damage to equipment resulting from failure to follow this instruction will void warranty.

NOTE: Check oil often during engine break–in. Refer to engine owner’s manual for recommendations.

NOTE: The generator assembly rotates on a prelubricated and sealed ball bearing that requires no additional lubrication for the life of the bearing.

Add Fuel

NOTE: This gasoline engine is certified to operate on

gasoline. Exhaust Emission Control System: EM (Engine Modifications).

WARNING

Fuel and its vapors are extremely flammable and explosive.

Fire or explosion can cause severe burns or death.

WHEN ADDING FUEL

•Turn generator OFF and let it cool at least 2 minutes before removing fuel cap. Loosen cap slowly to relieve pressure in tank.

•Fill fuel tank outdoors.

•DO NOT overfill tank. Allow space for fuel expansion.

•Keep fuel away from sparks, open flames, pilot lights, heat, and other ignition sources.

•DO NOT light a cigarette or smoke.

1.Use clean, fresh, regular UNLEADED fuel with a minimum of 85 octane. DO NOT use fuel which contains Methanol. DO NOT mix oil with fuel.

2.Clean area around fuel fill cap, remove cap.

3.Slowly add regular unleaded fuel to fuel tank. Be careful not to overfill. Allow about 1.5" of tank space for fuel expansion (Figure 2).

Figure 2 - Fuel Expansion

AirSpace

Tank

Fuel

1.5”

 

4.Install fuel cap and wipe up any spilled fuel.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Questions? Preguntas? Helpline 1-888-611-6708 M-F8-5 CT Portable Generator / Generador Portátil Model / ModeloSafety Rules Table of ContentsEquipment Description When Transporting or Repairing Equipment When Adding or Draining FuelWhen Starting Equipment When Operating EquipmentWhen Testing for Engine Spark When Adjusting or Making Repairs to Your GeneratorKnow Your Generator Features and Controls SectionRemove Generator From Carton AssemblyInstall Wheel Kit Refer to and install the wheel kit as followsAdd Engine Oil AssemblyWhen Adding Fuel Before Starting the EngineSystem Ground Using the GeneratorConnecting to a Building’s Electrical System Section OperationStarting the Engine Connecting Electrical LoadsOperation Operating GeneratorVolt AC, 20 Amp, Duplex Receptacles ReceptaclesGenerator Adapter Cord SET 120/240 Volt AC, 30 Amp, Locking ReceptacleDont Overload Power ManagementExample Specifications Section MaintenanceGeneral Maintenance Recommendations Engine Storage Other Storage Tips StorageStorage Generator StorageTroubleshooting Section TroubleshootingProblem Cause Solution About your equipment warranty TROY-BILT Owner Warranty Policy Effective November 1Equipment Consumer Use Commercial Use Reglas DE Seguridad Reglas de SeguridadConserve Estas Instrucciones Tabla DE Contenidos Descripción DEL EquipoCuando Opere EL Equipo Sección 1 Reglas de SeguridadCuando Añada Combustible O Vacíe EL Depósito Cuando Ponga EN Funcionamiento EL EquipoCuando Pruebe LA Bujía DEL Motor Sección 1 Instrucciones de SeguridadPrecaución Cuando Ajuste O Haga Reparaciones a SU GeneradorTomacorriente con Dispositivo de Seguridad de Características y MandosConozca SU Generador Tomacorriente Dobles de 120 Voltios AC, 20 AmpInstale el Juego de Ruedas MontajeMontaje Para Retirar El Generador De La CajaAgregue Combustible Sección 3 MontajeAntes DE Darle Arranque AL Motor Agregar Aceite al MotorConexión al Sistema Eléctrico de un Edificio OperaciónUSO DEL Generador Tierra del SistemaConexion De Cargas Electricas Sección 4 OperaciónOperando EL Generador Precaución Encienda el MotorVolt AC, 20 Amp, Receptáculos Dobles Receptáculos PrecauciónJuego DE Cables DEL Adaptador DEL Generador 120/240 Voltios AC, 30 Amp, Receptáculo de SeguridadEjemplo No Sobrecargue GeneradorCapacidad Control de la EnergíaEspecificaciones MantenimientoRecomendaciones Generales DE Mantenimiento Diagnositicos DE Averías Almacenamiento & Diagnosticos de AveríasAlmacenamiento Acerca de la seguridad de su equipo Efectiva desde el 1 ro de NoviembreEquipo Para Uso Del Consumidor Para Uso Comercial Garantía Limitada

01919-1 specifications

The Troy-Bilt 01919-1 is a versatile lawn care tool designed to simplify the chore of yard maintenance. Known for its robust performance and user-centric features, this product has carved its niche in the gardening community as a reliable choice for both amateur gardeners and seasoned landscapers.

One of the standout features of the Troy-Bilt 01919-1 is its powerful engine. Equipped with a reliable gas-powered engine, this machine offers impressive torque and durability. This ensures it can tackle even the toughest terrains, making it ideal for grassy landscapes, uneven surfaces, or dense foliage. The engine's efficient design also means reduced emissions, contributing to a more environmentally friendly operation.

Another important characteristic of this model is its unique Auto Choke System. This technology simplifies starting the machine, providing users with a hassle-free experience. Whether you're a novice or an experienced operator, you no longer have to worry about the complexities of manual choke controls. The system automatically adjusts the choke based on temperature conditions, facilitating easier startups in various weather conditions.

The Troy-Bilt 01919-1 is also designed with comfort and ergonomic considerations in mind. Its adjustable handle allows users to find the optimal height for operation, reducing strain on the back and shoulders during use. Additionally, the lightweight build enhances maneuverability, enabling operators to navigate tighter spaces and perform intricate tasks with relative ease.

When it comes to cutting performance, the Troy-Bilt model features precision-cut blades that ensure clean and even lawn trimming. The adjustable cutting height allows users to customize the grass length to suit their personal preferences or specific lawn care needs. This flexibility is particularly beneficial in maintaining healthy grass and overall lawn aesthetics.

Durability is a key characteristic of the Troy-Bilt 01919-1, as it is constructed from high-quality materials designed to withstand the rigors of regular use. This means less downtime for repairs and maintenance, providing customers with a reliable tool they can depend on season after season.

In summary, the Troy-Bilt 01919-1 combines powerful performance, ease of use, and innovative technology. It is an excellent investment for anyone looking to maintain their outdoor space efficiently. With features aimed at enhancing user experience and delivering quality results, it's no wonder that this model is a popular choice among lawn care enthusiasts.
Top Page Image Contents