Allied Telesis AT-FS238a/2, AT-FS238b/1 manual Bridging Converter Performance, Smart MissingLink

Page 22

Overview

Note

MissingLink or Smart MissingLink is disabled when you perform a link test. Consequently, to ensure that the MissingLink or Smart MissingLink is enabled on the bridging converter, always set the Mode Selection button so that the ML or SML LED is green during normal network operations.

Smart MissingLink

Like MissingLink, the Smart MissingLink feature terminates the link on the failed port thereby notifying you when a connection has been lost. Additionally, Smart MissingLink indicates on which port the connection has failed. This is shown by a blinking LNK LED on the good port.

For example, if the network twisted pair cable to the 10Base-T/100Base-TX port on the bridging converter were to fail, the LNK LED on the 100Base-FX fiber optic port will blink, indicating a failed connection on the twisted pair port. The fiber optic port is still able to receive a signal.

The bridging converter notifies the end-node connected to the fiber optic port that the connection on the twisted pair port has been lost. If the failure had started with the fiber optic cabling, the LNK LED on the twisted pair port would blink.

The value to this type of network monitoring and fault notification is so that you can quickly see which port has failed and troubleshoot your network accordingly.

Bridging Converter Performance

The bridging converters perform at:

148,800 pps for 100 Mbps and 14,880 pps for 10 Mbps for full wire speed forwarding and filtering

200 Mbps maximum throughput in 100 Mbps, full-duplex mode

20 Mbps maximum throughput in 10 Mbps, full-duplex mode

Storage for up to 2k MAC addresses

280 kB (per port) packet buffer

Low latency 15.6 ∝s (64-byte packet, 100 Mbps full-duplex)

10

Image 22
Contents AT-FS238a/1 AT-FS238b/1 AT-FS238a/2 AT-FS238b/2 Page Declaration Of Conformity Radiated EnergyImmunity Electrical SafetyRFI Emission LaserAT-FS238a/x and AT-FS238b/x Series Installation Guide Page Table of Contents Appendix B Translated Safety and Emission Information Where to Find Web-based Guides Document Conventions Welcome to Allied TelesynTelephone Support Contacting Allied Telesyn Technical SupportOnline Support Technical Support E-mail AddressesFor Sales or Corporate Information Returning ProductsTell Us What You Think Page Overview AT-FS238a/xSeries Front Panel AT-FS238a/1 Model DIP Switches External Power Supply 100Base-FX 10Base-T/100Base-TX ModelKey Features Store and forward switching modeStatus LEDs LEDTwisted Pair Port Duplex ModePort Speed Fiber Optic Port Auto MDI/MDI-XLink Test Mode Selection ButtonMissingLink Bridging Converter Performance Smart MissingLinkMAC Address Table DIP SwitchesStore and Forward Network Topologies Network TopologyInstalling the Bridging Converter Verifying Package ContentsPlanning the Installation DistanceSelecting a Site AT-FS238b/2 Micron SMF Simplex 40 km 24.8 miInstalling the Bridging Converter Attaching the Protective FeetDIP Connecting a 12VDC Powered Unit Wiring and Connecting a 12-50VDC Powered Unit Connecting an 12VDC Powered UnitPositive, Ground, and Negative Symbols Connecting the Stripped Wire Installing the Bridging Converter Warranty Registration Page Troubleshooting Troubleshooting Environmental PhysicalElectrical Rating Agency Certifications EMI/RFIFiber Optic Port Specifications Min Avg.3 Max MicronsRJ-45 Pinout Assignments Operating Type1 Budget Distance2 Distance3MDI-X Page Translated Safety and Emission Information Translated Safety and Emission Information USA/Canada Safety Lightning DangerEurope EU Translated Safety and Emission Information Sicherheit Gefahr Durch Blitzschla BetriebstemperaturTranslated Safety and Emission Information Sikkerhed Fare Under Uvejr BetjeningstemperaturTranslated Safety and Emission Information Veiligheid Gevaar Voor Blikseminslag BedrijfstemperatuurTranslated Safety and Emission Information Sécurité Température De FonctionnementTranslated Safety and Emission Information Turvallisuus Salamaniskuvaara 13 KäyttölämpötilaTranslated Safety and Emission Information Norme Di Sicurezza Pericolo Di Fulmini Temperatura Di FunzionamentoTranslated Safety and Emission Information Sikkerhet Fare For Lynnedslag DriftstemperaturTranslated Safety and Emission Information Segurança Perigo De Choque Causado Por Raio Temperatura De FuncionamentoTranslated Safety and Emission Information Seguridad Peligro De Rayos Temperatura Requerida Para La OperaciónTranslated Safety and Emission Information Säkerhet Fara För Blixtnedslag

AT-FS238a/1, AT-FS238a/2, AT-FS238b/1, AT-FS238b/2 specifications

Allied Telesis is a renowned manufacturer specializing in networking solutions, and its AT-FS238 series of switches exemplifies the company's commitment to delivering high-quality networking hardware. The AT-FS238b/2, AT-FS238b/1, AT-FS238a/2, and AT-FS238a/1 are robust, cost-effective Ethernet switches that cater to various networking needs, including small to medium-sized enterprises and branch offices.

These switches are designed with several key features that enhance performance and reliability. One of the standout characteristics is their support for high-speed connections, with 10/100/1000 Mbps ports that ensure fast data transfer rates and efficient network operations. This high-speed capability is essential for organizations that rely on bandwidth-intensive applications.

Allied Telesis AT-FS238 series switches incorporate advanced technology such as Auto-MDI/MDIX, which automatically detects the type of Ethernet cable connected and adjusts accordingly, eliminating the need for crossover cables. This feature significantly simplifies installation and reduces the likelihood of connectivity issues.

The switches also boast a metal chassis that offers durability and helps maintain optimal performance in various environments. With a robust design, these devices can withstand typical operational stresses, making them suitable for deployment in both office and industrial settings.

In terms of manageability, the AT-FS238 series provides basic configuration options through a user-friendly interface, making it accessible for IT staff who may not have extensive networking experience. The switches support plug-and-play functionality, allowing for seamless integration into existing networks without the need for extensive setup.

Power efficiency is another significant aspect of these switches, as they utilize energy-saving technologies that reduce operating costs while maintaining high performance. This characteristic aligns with the growing emphasis on sustainable tech solutions in modern networking.

Each model in the AT-FS238 series is equipped with a varying number of ports, catering to the specific needs of different networking scenarios. These options ensure that organizations can choose the right model that fits their scalability requirements.

In summary, the Allied Telesis AT-FS238b/2, AT-FS238b/1, AT-FS238a/2, and AT-FS238a/1 switches represent a solid choice for businesses seeking reliable and efficient networking solutions. Their combination of high-speed capabilities, user-friendly features, durable design, and energy efficiency makes them a valuable addition to any network infrastructure.