Hobart 6614 ML-134050, 6614 ML-134096 manual Model 6614 Meat SAW General

Page 2

Installation, Operation, and Care of

MODEL 6614 MEAT SAW

SAVE THESE INSTRUCTIONS

GENERAL

The 6614 Meat Saw is rugged, durable, and easy to clean. The saw is equipped with a water resistant 3 HP electric motor and direct gear drive transmission that provides a blade speed of 3500 feet per minute. The carriage (Fig.1) has stainless steel ball bearings providing easy travel and dependability. The shaped front edge of the carriage is comfortable to the operator's body even when leaned on during movement. The carriage lock is standard. The upper pulley cover and baffle are stainless steel.

Table, carriage, pulleys, guides, and wiper assemblies can be quickly removed without tools for ease of cleaning. Moving parts are enclosed but accessible. The blade is guarded above and below the cutting zone. The pusher plate is provided to eliminate the need of handling items close to the blade; it can ride on the right "flanged-end" of the carriage so you keep your hands away from the cutting edge of the blade.

For electrical specifications above 250 volts, a transformer provides a 115 volt control circuit voltage.

One long-life blade is furnished with each saw as standard equipment. This blade cannot be resharpened; replacement blades are available through your local Hobart Service Office.

UPPER PULLEY COVER

SWITCH KNOB

COLUMN GUARD

UPPER GUIDE AND GUARD

GAUGE PLATE

TABLE (LEFT)

SAW BLADE

TABLE (RIGHT)

CARRIAGE

GAUGE PLATE HANDLE

LOCK LEVER

 

 

LOWER COVER (SCRAP PAN)

CARRIAGE LOCK

 

 

 

 

 

 

 

LEGS

FEET

Fig. 1

PL-41501-1

© HOBART CORPORATION, 1995, 2000

– 2 –

Image 2
Contents Truct ONS Model 6614 Meat SAW General Upper Guide and Guard Assembly InstallationUnpacking and Assembly LevelingBlade Scrapers Upper Pulley Cover Stainless SteelLower Cover Scrap Pan Pulley WiperColumn Guard Lower PulleyUpper Pulley Tables Right and LeftScrap Tray CarriageBlade Tension Lower Blade GuideRemoving the Blade Control BOX Heater Clean SAW Before USEElectrical Connections Controls Safety FeaturesOperation SawingGauge Plate Pusher PlateCleaning and Sanitizing Lubrication MaintenanceService Changing SAW Blades