PRODUCT SPECIFICATIONS
Item | Description |
Electrical Requirements | Input Voltage: 220V / 60 Hz / 45 Input Amperage |
| Power Cord: 10 AWG @ 6’ Long |
| Power Plug: 220V (not included), Requires 50 Amp Circuit |
Duty Cycles | 60% @ 250 Amps / 100% @ 195 Amps |
Maximum Welding | Up To 3/8” Mild Steel |
Thickness Capacity |
|
Welding Current | 30 – 250 Amps |
Required Wire Sizes | .024” To .047” Diameter |
Wire Control Settings | Internal, Spot & Pause, 4 Time, & 2 Time |
Gun Coolant Type | Air Cooled |
Fuse Type | 3 AMP Buss Fuse |
Gun Power Cable Length | 13’ |
Ground Clamp Cable Length | 13’ |
Wheels | Front: Swivel Castors / |
| Rear: Rigid / 8” Diameter x |
|
|
Accessories | Gas Pressure Regulator w/Flow Meter |
| Welding Gloves / Face Mask / 1 Torch Liner / 5 Spare Tips |
Weight | 187 Pounds |
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts Lists on pages 26 and 27 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2.Do not operate welding equipment in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Welding equipment creates sparks which may ignite the dust or fumes.
SKU 91146 | For technical questions, please call | PAGE 2 |