Husqvarna MC1813H, MC1809H, MC1805B, MC1809R, MC1813R, MC1805G Diagram 6 Blade Guard

Diagram 6 – Blade Guard

(Rev July 11, 2002)

		BILL OF MATERIAL
INDEX	P/N	DESCRIPTION				QTY
1	------	Rear Guard Weldment		-	18 Inch	1
2	139075	Hinge (Note A)				1
2A	195127	Hinge (Note A)				1
3	139596	Front Guard Weldment,			18 Inch (Note A)	1
3A	195120	Front Guard Weldment,			18 Inch (Note A)	1
4	020762	Washer, Flat .250	SAE		(Note A)	6
4A	173059	Washer, Flat M8			(Note A)	6
5	139761	Capscrew, Hex Hd M6		x	1.0 x 20mm (Note A)	6
5A	167478	Capscrew, Hex Hd M8		x	1.25 x 25mm (Note A)	6
6	139745	Locknut, Fiber M6	x	1.0 (Note A)		6
6A	139738	Locknut, Fiber M8	x	1.25 (Note A)		6
7	139098	Splash Flap				1
8	167761	Capscrew, Hex Hd M5		x	0.8 x 20mm	4
9	173047	Washer, Flat M5				2
10	172316	Locknut, Fiber M5	x	0.8		2
11	020782	Lockwasher, Split #10				2
12	172011	Nut, Hex Hd M5 x 0.80				4
13	040330	Spring, .375 OD x	.054 Dia			1
14	049212	Clamp, Water Tube				2
15	167818	Capscrew, Slot Flat		Hd M6 x 1.0 x 16mm		4
16	139745	Locknut, Fiber M6	x	1.0		8
17	167046	Water Tube, 18 Inch				2
18	020864	Plug, Soc Hd 1/8 NPT Brass				2
19	139051	Gasket, Water Manifold				1
20	139045	Water Manifold, Machined				1
21	040275	Adapter, 3/8 NPT x Male Garden Hose				1
22	167551	Capscrew, Hex Hd M6		x	1.0 x 40mm	4
NOTE A:
For P/N 195127 Hinge (1/4” Thick)				use P/N 195120 Front Guard Weldment – 18”
and use hardware (Item 4A, 5A &			6A).

For P/N 139075 Hinge (1/8” Thick) use P/N 139596 Front Guard Weldment – 18” and use hardware (Item 4, 5 & 6).

31