Husqvarna K 760 manual Maintenance schedule, Functional inspection

Page 18

MAINTENANCE

General

!

WARNING! The user must only carry out the maintenance and service work described in this manual. More extensive work must be carried out by an authorized service workshop.

The engine should be switched off, and the stop switch in STOP position.

Wear personal protective equipment. See instructions under the heading ”Personal protective equipment”.

The life span of the machine can be reduced and the risk of accidents can increase if machine maintenance is not carried out correctly and if service and/or repairs are not carried out professionally. If you need further information please contact your nearest servicing dealer.

Let your Husqvarna dealer regularly check the machine and make essential adjustments and repairs.

Maintenance schedule

In the maintenance schedule you can see which parts of your machine that require maintenance, and with which intervals it should take place. The intervals are calculated based on daily use of the machine, and may differ depending on the rate of usage.

Daily maintenance

Weekly maintenance

Monthly maintenance

 

 

 

Cleaning

Cleaning

Cleaning

 

 

 

External cleaning

 

Spark plug

 

 

 

Cooling air intake

 

Fuel tank

 

 

 

 

 

 

Functional inspection

Functional inspection

Functional inspection

 

 

 

General inspection

Vibration damping system*

Fuel system

 

 

 

Throttle lockout*

Muffler*

Air filter

 

 

 

Stop switch*

Drive belt

Drive gear, clutch

 

 

 

Guard for the blade*

Carburetor

 

 

 

 

Cutting blade**

Starter

 

 

 

 

*See instructions in the section "Machine’s safety equipment".

** See instructions in the section "Cutting blades" and "Assembly and settings".

18 – English

Image 18
Contents 760 KEY to Symbols Symbols on the machineExplanation of warning levels Contents Features PresentationDear customer What is what on the power cutter K 760? PresentationGeneral MACHINE´S Safety EquipmentStop switch Throttle lockoutChecking the vibration damping system Vibration damping systemMuffler Inspecting the mufflerCutting Blades Abrasive bladesDiamond blades Toothed bladesTransport and storage Fitting the cutting blade Assembling and AdjustmentsChecking the drive shaft and flange washers Guard for the bladeGasoline Fuel HandlingFuel Two-stroke oilFueling OilGuard K760 OilGuardLong-term storage General safety precautions OperatingProtective equipment Work area safety Basic working techniquesKickback Starting and Stopping Before startingStarting Stopping Maintenance Maintenance scheduleFunctional inspection Cleaning Functional inspectionAdjusting the idle speed CarburetorReplacing the drive belt Tensioning the recoil spring StarterChanging a broken or worn starter cord Changing a broken recoil springFuel system Air filterDrive gear, clutch Technical Data Cutting equipmentFederal Emission Control Warranty Statement Your Warranty Rights and ObligationsPage ´z+UC¶5h¨ Page Original instructions 1153355-95 ´z+UC¶5h¨ ´z+UC¶5h¨