Husqvarna K970 manual Transport and storage

Page 9

•adjustment between the rollers and blade is correct. See instructions in the section "Assembling and adjustments".

The roller setting should be checked twice during the life of the diamond blade, once after ﬁtting the blade and when the blade is semi worn.

Transport and storage

•Store the blade in a dry place.

•Inspect new blades for transport or storage damage.

English – 9

Image 9

Contents Ring KEY to Symbols Symbols on the machineExplanation of warning levels Contents Features PresentationDear customer What is what on the power cutter? What is WHAT?Stop switch MACHINE´S Safety EquipmentGeneral Throttle lockoutVibration damping system Off, and the stop switch in Stop positionMufﬂer Checking the vibration damping systemBlades Transport and storage Fitting the blade Assembling and AdjustmentsWater hose Fuel Handling FuelFueling Long-term storage General safety precautions OperatingProtective equipment Basic working techniques Work area safetyCutting depth Small workCutting holes Kickback How to aviod kickbackGeneral rules Pinching kickbackBefore starting Starting and StoppingStarting Start the engineStopping Maintenance Maintenance scheduleFunctional inspection Functional inspection CleaningReplacing the support rollers Support rollersDrive belt Drive wheelReplacing the drive wheel Tensioning the drive beltCarburetor Adjusting the idle speedStarter Checking the starter cordFuel system Air ﬁlter Reconstructing the bladeDrive gear, clutch Replacing the air ﬁlterTroubleshooting schedule Trouble ShootingTechnical Data Technical dataCutting equipment Your Warranty Rights and Obligations Federal Emission Control Warranty StatementMaintenance Statement Page 2012-01-18 rev Original instructions 1152681-95