The centrifugal condensing unit may be connected to the evaporator section by means of
The centrifugal fan condensing unit includes scroll compressor, condenser coil, centrifugal blower assembly,
Condensing unit has hot gas bypass standard feature which bypasses hot gas around the compressor directly to the suction side of the compressor to pro- vide capacity control and reduce compressor cycling. System includes liquid injection valve to maintain proper suction superheat.
Unit must be mounted indoors. Duct flanges are pro- vided.
The air cooled condensing unit can be mounted on the roof or a ground level site. The condensing unit housing is manufactured of galvanized steel with a powder coat finish. The
The standard prop fan condensing unit includes scroll compressor, prop fan, high head pressure switch, hot gas bypass and
This unit is available in these optional configura- tions:
•105°F (40°C) ambient for high ambient condi- tions.
•95°F (35°C) ambient
Factory installed
(3 ton only): Consists of one
Available in 15 ft. (4.6m) and 30 ft. (9.1m) lengths for interconnection of remote located condenser module. Maximum recommended distance between evapora- tor and condenser modules with
(3 ton only): Contains two suction and two liquid line compatible fittings that allow
| DISCONTINUED |
| PRODUCT |