Philips 87120, SAG100, 5270, 7186 manual Manage in accord with disposal laws

Incandescent 20–51 Halogen 52–70 Compact Fluorescent 71–86 Fluorescent 87–120

HALOGEN LAMPS

For the most current product information, go to the e-catalog on www.philips.com

¥Exclusive to Philips Lighting Company

$ Energy Saving Product

♦Maximum Beam Candlepower

This Bulb Meets US Federal Minimum Efficiency Standards

†New since last printing

* Two Lamp Carded Pack.

‡Quantity shown is minimum shipping container— refer to Net Price Schedule for number of lamps to qualify as a standard case.

(82)CAUTION: To avoid deterioration of lampholder by heat, use only heat resistant lampholders or fixtures listed by a nationally recognized electrical testing organization for use with reflector or PAR lamps.

(86)PAR Halogen Caution Notice: Before using bulb, see operating instructions on inside flap. Adherence to the operating instructions will reduce the risk of personal injury or fire.The filament capsule contained inside this glass bulb is pressurized, operates at high temperature and could unexpectedly shatter. Should the outer bulb break, particles of extremely hot glass could be discharged into the fixture and/or the surrounding environment, thereby creating a risk of personal injury or fire. Operating Instructions: Before replacing, turn off power and let lamp cool to avoid electrical shock or burn.

—For indoor or outdoor use. A weather-protected fixture is recommended for wet locations.

—Suitable for use in open fixtures.

—Do not exceed the maximum wattage rating of the fixture.

—Do not use if outer glass is scratched or broken since it may break during operation or removal.

—If outer glass breaks the lamp may continue to light, however, immediately discontinue use.

—Due to the heat that radiates from the bulb, do not use in close proximity to combustible materials or objects susceptible to drying or fading.

—Manage in accord with disposal laws.

(91)CAUTION: Do not touch inner capsule with bare hands. Fingerprints may result in shorter life. Remove fingerprints with alcohol. THIS LAMP IS PRESSURIZED AND COULD SHATTER so to avoid injury and to avoid exposure to ultraviolet radiation, use only in fixtures that provide a protective shield of tempered glass. Provide adequate ventilation to ensure that seal temperature does not exceed 350°C and use only in fixtures rated for the wattage stated on this package.To avoid risks of burns or other injury, turn power off and allow lamp to fully cool before attempting to replace. Socket condition may affect lamp life. Inspect and replace socket if deterioration has occurred.

(92)CAUTION: THIS LAMP IS PRESSURIZED AND COULD SHATTER so to avoid injury and to avoid exposure to ultraviolet radiation, this lamp should be used in a fixture that provides a protective shield of tempered glass. Provide adequate ventilation to ensure that seal temperature does not exceed 350º C and use only in fixtures rated for the wattage stated on this package.To avoid risks of burns or other injury, turn power off and allow lamp to fully cool before attempting to replace. Socket condition may affect lamp life. Inspect and replace socket if deterioration has occurred.

(93)Rated average life is the length of operation (in hours)

at which point an average of 50% of the lamps will still be operational and 50% will not.

(95)NOTICE: Do not touch bulb with bare hands. Fingerprints may result in shorter life. Remove fingerprints with alcohol.

CAUTION:THIS LAMP IS PRESSURIZED AND COULD SHATTER so to avoid injury and to avoid exposure to ultraviolet radiation, use only in fixtures that provide a protective shield of tempered glass. Provide adequate ventilation to ensure that seal temperature does not exceed 350° C and use only in fixtures rated for the wattage stated on this package.To avoid risks of burns or other injury, turn power off and allow lamp to fully cool before attempting to replace. Socket condition may affect lamp life. Inspect and replace socket if deterioration has occurred.

(96)Operating Instructions: Do not use lamp in close proximity to combustible materials. If used outdoors, use in an enclosed fixture only. If used indoors, no additional shield is required.

Can be operated in all positions. CAUTION: Read operating instructions before use. If outer glass breaks, turn power off immediately and avoid touching any metal components.To avoid potential burn and electrical shock during lamp replacement, always turn power off and let lamp cool before replacing bulb. Lasts 2 years based on 4 hours average usage per day/7 days per week.

(97)Operating Instructions: Before replacing, turn off power and let lamp cool to avoid electrical shock or burn. For indoor use only. Do not allow hot bulb to come in contact with liquid or metal parts of the fixture as glass may shatter. Do not exceed the maximum wattage rating of the fixture. Do not use if outer glass is scratched or broken since it may break during operation or removal. If outer glass breaks the lamp

may continue to light, however, immediately discontinue use. Due to the heat that radiates from the bulb, do not use in close proximity to combustible materials or objects susceptible to drying or fading. Manage in accord with disposal laws. CAUTION: Adherence to the operating instructions will reduce the risk of personal injury or fire.The filament capsule contained inside this glass bulb is pressurized, operates at high temperature and could unexpectedly shatter. Should the outer bulb break, particles of extremely hot glass could be discharged into the fixture and/or the surrounding environment, thereby creating a risk of personal injury or fire.

(98)Note: This twistline has a GU10 base and may be used in fixtures that have either GU10 or GZ10 sockets. Operating Instructions: Do not use in close proximity to combustible materials or objects adversely affected by drying or fading. Can be operated in all positions. CAUTION:THIS LAMP IS PRESSURIZED AND COULD SHATTER so to avoid injury and to avoid exposure to ultraviolet radiation, this lamp should be used in a fixture that provides a protective shield of tempered glass. If outer glass breaks, immediately discontinue use. Always turn power off and let lamp cool before removal to avoid potential burn or electric shock.

(99)WARNING: BULB OPERATES AT VERY HIGH

TEMPERATURES AND MUST BE USED PROPERLY TO AVOID/REDUCE RISK OF FIRE. Do not use bulbs greater than 300 watts in indoor residential fixtures. Use only in fixtures specifying this bulb type and that meet revised UL

153 standard for tungsten-halogen torchiere lamps. Bulb is pressurized and could shatter and should only be used in fixtures that provide a protective shield of tempered glass.To avoid exposure to ultraviolet radiation which could cause skin and eye irritation use only in fixtures that provide a protective shield of tempered glass. NOTICE: Do not touch bulb with bare hands. Fingerprints may result in reduced performance unless they are removed with alcohol.When operating, bulb is hot.To avoid risks of burns or injury, turn power off and allow bulb to cool before replacing. Socket conditions may affect bulb life. Inspect and replace socket if deterioration has occurred. Provide adequate ventilation to ensure that seal temperature does not exceed 350°C.

TO AVOID/REDUCE RISK OF FIRE, DO NOT USE NEAR COMBUSTIBLE MATERIALS.

(100)Product available Oct. 1, 2008

(101)Available for sale only in the state of CA

(102)Complies with CEC-140-2008-001, Part 1605.2 State Standards for Federally Regulated Appliances,Table K-3. For more information go to www.energy.ca.gov/siting/title20/.

(103)Complies with the Energy Independence and Security Act of 2007 (Public Law 110-140). Section 321—Efficient Light Bulbs.

(104)Complies with the Energy Independence and Security Act of 2007 (Public Law 110-140), Section 322—Incandescent Reflector Lamp Efficiency Standards.

70Philips Lighting Company SAG100 2008–2009