SECTION 3: ASSEMBLY
Overview
NOTICE
All assembly and adjustment instructions assume that your lathe is axially aligned, i.e., the headstock and tailstock are cen- tered on the same axis. Consult your lathe owner’s manual for proper procedure.
Most of your Copy Attachment has been assem- bled at the factory. However, you will need to attach the handle to the carriage handwheel, mount the
The illustration below indicates the features and controls included with the Model G2891. Assembly, adjustments, operation and mainte- nance procedures will all be more successful after you develop an understanding of the copy attachment’s construction and functions.
Some metal parts may have sharp edges (called “flashing”) on them after they are formed. Please examine the edges of all parts before handling them. Failure to do so could result in skin laceration.
7.
8.
9.
8.Master Spindle Support
9.Crossfeed Handwheel
10.Stylus Height Adjuster
11.Stylus
12.Quill Gap Adjuster
13.Template Support (2)
14.Spindle Support Adjuster
1.
2.
3. 4.
10.
11.
12.
13.
14.
1.Copy Carriage Bed
2.Carriage Travel Cable
3.Cutting Tool Carriage
4.Cutting Tool Arbor
5.Mounting Brackets (2)
6.Carriage Stop
7.Longitudinal Handwheel
5.
6.
G2891 Lathe Copy Attachment |