![](/images/new-backgrounds/1283433/2834335x1.webp)
For Product Mfg. Since 1/10 | P R E P A R A T I O N | Model SB1269 |
Unpacking
This item was carefully packaged to prevent damage during transport. If you discover any damage, please immediately call Customer Service at (360)
Inventory
When you are completely satisfied with the condition of your shipment, you should inventory the contents.
Inventory (Figure 3) | Qty |
A.Cap Screws
| (Taper Attachment Mounting) | 4 |
B. | Taper Attachment Assembly | 1 |
C. Tapered Pins 8.7 x 7.7 x 47mm | 2 | |
D. | Copper | 1 |
E. | Deadman Clamp Assembly | 1 |
F. | Deadman Arm and Clevis | 1 |
Things You'll Need
This attachment is intended to be a permanent installation. Installation will take approximately
1.2 hours and require the following items:
For Assembly
•Cotton Rags
•Mineral Spirits
•Safety Glasses
•Oil Can with any Basic Machine Oil
•Assistant
•Open End Wrench (17mm)
•Hex Wrenches (3, 4, 5, 6, and 8mm)
•Tapered Drill Bit (8mm)
•Safety Glasses
•Oil Can with Pressure Tip
•Dila Indicator with Magnetic Base
•Phillips Screwdriver, #2
•Hammer
•Drill Bit, 19⁄64"
•Spiral Pin Reamer, Industrial Size: 6
A
B
C
ED
F