Delta 46-746, 46-745, 46-765X instruction manual PARTS, Service or Warranty Assistance, Accessories

Page 23

ACCESSORIES

A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of your nearest supplier.

Since accessories other than those offered by Delta have not been tested with this product, use Of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be used with this product.

PARTS, SERVICE OR WARRANTY ASSISTANCE

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network of Porter-Cable Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the loca- tion of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Two Year Limited New Product Warranty

Delta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the prod- uct prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. For all refurbished Delta product, the warranty period is 180 days. Delta may require that electric motors be returned prepaid to a motor manufac- turer’s authorized station for inspection and repair or replacement. Delta will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental or con- sequential damages resulting from defective products. This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by Delta.

23

Image 23
Contents Variable Speed Wood Lathe General Safety Rules Safety Guidelines DefinitionsStay ALERT, Watch What YOU are Doing Properly Adjust the Tool Rest Height Additional Safety Rules for Wood LathesGrounding Instructions Power ConnectionsMotor Specifications 150 250 volts, inclusive Extension CordsFunctional Description Unpacking and CleaningAttaching Lathe BED To Pedestals AssemblyAttaching LEG Inserts Tool Rest Adjusting Clamps on the Headstock and TailstockAdjusting Clamp on Tool Rest Tailstock Live CenterActivating the Spindle Locking Switch in the OFF PositionStarting and Stopping the Tool Changing Speed Ranges Shows the chart located inside the belt coverCentering the Work HOW to Turn SpindlesLathe Tools Tool Rest Position Mounting the WorkPosition of Hands Roughing a CylinderSquaring AN END Using the Parting ToolSmoothing a Cylinder Cutting Small Beads Cutting a ShoulderCove Cuts VEE GroovesLong Cuts Square Sections Outboard Turning Faceplate TurningMounting Work to Faceplate Replacing Drive Belt MaintenanceLubrication Accessories PARTS, Service or Warranty AssistanceCanadian PORTER-CABLE Delta Service Centers