Delta 46-765X, 46-745, 46-746 instruction manual Variable Speed Wood Lathe

Page 1

16” Variable Speed Wood Lathe

(Models 46-745, 46-746, & 46-765X)

PATENT PENDING

PART NO. 434-10-651-0008 - 04-02-03

Copyright © 2003 Delta Machinery

INSTRUCTION MANUAL

To learn more about DELTA MACHINERY

visit our website at: www.deltamachinery.com.

For Parts, Service, Warranty or other Assistance,

please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Image 1

Contents Variable Speed Wood Lathe General Safety Rules Safety Guidelines DefinitionsStay ALERT, Watch What YOU are Doing Properly Adjust the Tool Rest Height Additional Safety Rules for Wood LathesMotor Specifications Power ConnectionsGrounding Instructions 150 250 volts, inclusive Extension CordsFunctional Description Unpacking and CleaningAttaching Lathe BED To Pedestals AssemblyAttaching LEG Inserts Adjusting Clamp on Tool Rest Adjusting Clamps on the Headstock and TailstockTailstock Live Center Tool RestStarting and Stopping the Tool Locking Switch in the OFF PositionActivating the Spindle Changing Speed Ranges Shows the chart located inside the belt coverLathe Tools HOW to Turn SpindlesCentering the Work Tool Rest Position Mounting the WorkPosition of Hands Roughing a CylinderSmoothing a Cylinder Using the Parting ToolSquaring AN END Cutting Small Beads Cutting a ShoulderLong Cuts VEE GroovesCove Cuts Square Sections Mounting Work to Faceplate Faceplate TurningOutboard Turning Replacing Drive Belt MaintenanceLubrication Accessories PARTS, Service or Warranty AssistanceCanadian PORTER-CABLE Delta Service Centers