Harbor Freight Tools 98676 To use the Headstock Spur 3, See Figure G, See Figure F

4. To use the Headstock Spur (3) and
FIGURE C			TAILSTOCK
FACEPLATE	WOODSTOCK	HEADSTOCK HOLE	HOLE
(2)	(NOT INCLUDED)
		PUSH OUT ROD
		(22)

	TAILSTOCK
FLAT HEAD	SPUR
BRASS	(61)
SCREWS	FIGURE E
WOOD
(83)

4. To install the Headstock Spur (3)	FIGURE F
and Tailstock Spur (61), remove the
Faceplate (2) from the Headstock	DIGITAL READOUT
Spindle (4) using the Push Out Rod	(79)
(22) and Wrench (47). Insert the
Headstock Spur into the Spindle hole.
then insert the Tailstock Spur into the	SCREWS
Tailstock hole. To remove either the
	(80)
Headstock Spur or Tailstock Spur
insert the Push Out Rod into the hole 6.	The Lathe is now assembled.
at the opposite end of the Headstock	(See Figure G.)
or Tailstock. (See Figures D and E.)
WRENCH
(47)

PUSH OUT ROD

(22)

HEADSTOCK

SPUR

(3)

FIGURE D

FIGURE G

FACEPLATE

(2)

5.To install the Digital Readout (79), use the two Screws (80).

(See Figure F.)

SKU 98676 For technical questions, please call 1-800-444-3353. Page 10