Grizzly H2669 Inventory, Box Contents Figures 1 Qty, Hardware and Small Parts not shown

Inventory

When you remove all parts from the shipping box, you should have the following items:

Box Contents (Figures 1 & 2)		Qty
A.	Lathe Bed	1
B.	Tailstock Assembly	1
C.	Toolrest	1
D.	Headstock Assembly	1
E.	Sanding Table	1
F.	Faceplate with Sanding Disc	1
G.	Toolrest Base and Lockdown Lever Assy .. 1

Hardware and Small Parts (not shown)

•	Spur Center	1
•	Screw Center	1
• Screw Center Set Screw		1
•	Drill Adapter	1
• Tap Screws M4 x 15		8
•	Hex Wrench 5MM	1
• Open End Wrench 17/22MM		1

NOTICE

Some hardware/fasteners on the inventory list may arrive pre-installed on the machine. Check these locations before assuming that items from the inventory list are missing.

-8-

A

B

Figure 1. Box contents picture 1.

D

E C

F

G

Figure 2. Box contents picture 2.

In the event that any nonproprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or for the sake of expedi- ency, replacements can be obtained at your local hardware store.

H2669 Hobby Lathe