Grizzly G0509 manual Quick Change Tool Holders

Quick Change Tool Holders

All models below are Series 300

G5708—Boring Bar Holder, 3⁄4" & 1" Bar

G5711—Parting Tool Holder, 3⁄4" Tool

G5712—Knurling Tool Holder, 1⁄2"~ 3⁄4" Tool

G5710—Morse Taper Holder, MT#4 Taper

G5707—Turning/Boring Holder, 1⁄2"~3⁄4" Bits

G5706—Turning Holders, 1⁄2"~3⁄4" Bits

G5708 G5711 G5712

G5710 G5707 G5706

Figure 44. Series 300 quick change tool holders.

H5787—MT#4 x 5" Bull Nose Rolling Center Built with precision sealed bearings, designed for heavy-duty use on hollow workpieces.

Figure 45. MT#4 bull nose rolling centers.

G9889—MT#4 Long Nose Precision Center Provides critical tool clearance. Adjustable thrust bearings, 60° tip and 30° clearance relief angle.

Figure 46. MT#4 Long Nose Center

G0509 & G0509G 16" x 40" Lathe

G7038Z—Boring Bar

G7040—Carbide Inserts for Steel (5 pk) G7048—Carbide Inserts for Cast Iron (5 pk)

Figure 47. G7038Z Boring Bar.

G7030—Threading Tool Holder G7041—Carbide Inserts for Steel (5 pk) G7049—Carbide Inserts for Cast Iron (5 pk)

Figure 48. G7030 Threading Tool Holder.

G7033—Internal Threading Tool Holder G7042—Carbide Inserts for Steel (5 pk) G7050—Carbide Inserts for Cast Iron (5 pk)

Figure 49. G7033 Int. Threading Tool Holder.

-39-