Jet Tools JDP-17MF operating instructions Basic Operation, Lubrication

Page 15

Basic Operation

•Always use a back-up piece of scrap wood to cover the table. This protects both the table and the drill bit.

•Place material to be drilled in such as way as to come into contact with the left side of the column. This prevents the material from spinning.

,WARNING!

If the work piece is not large enough to come into contact with the column, use a

clamp or drill press vise that is securely

fastened to the table!

Failure to comply may cause serious injury!

•Feed the bit into the material with only enough force to allow the drill bit to work. Feeding too slowly may cause burning of the workpiece. Feeding too quickly may cause the motor to stop and/or the drill bit to break.

•Generally speaking, the smaller the drill bit, the greater the RPM required. Wood requires higher speeds than metal. Metal is usually drilled at slower speeds.

•In dusty environments, frequently blow out any dust that accumulates inside the motor.

Lubrication

Periodically lubricate the gear and the rack, the table elevation mechanism, the splines (grooves) in the spindle, and the teeth of the quill with a #2 tube grease.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Copyright WMH Tool Group Vantage Drive Elgin, IllinoisPart No. M-354169 Revision C1 01/06More Information WMH Tool Group Warranty Warranty and Service25-50 Total Length of Cord in FeetPage Volt Operation Grounding InstructionsDisconnect the machine from the power source Model No. BP-1, Stock No On-Off Switch PadlockTable of Contents SpecificationsContents of the Shipping Container Tools Supplied for AssemblyTools Required for Assembly Assembly Removing the Chuck and Arbor Unplug machine from the power sourceAdjusting the Depth Stop Unplug the machine from the power sourceChanging Spindle Speeds Speed & Pulley Chart Return Spring Adjustment Table Tilt AdjustmentWork Light Lubrication Basic OperationTroubleshooting Parts Breakdown for JDP-17MF BB-6205ZZ Parts List for JET JDP-17MF Drill PressIndex Part Description Size Qty 2658MZDU36DC1200-44 10706508A110607970A1 2807BB08C428065558U4 2504MZC005Page Page Page WMH Tool Group

JDP-17MF specifications

The Jet Tools JDP-17MF is a highly versatile and robust floor-standing drill press, designed to meet the demands of both professional woodworkers and hobbyists alike. With its powerful motor and advanced features, this drill press offers precision, efficiency, and reliability, making it a valuable addition to any workshop.

One of the standout characteristics of the JDP-17MF is its 3/4 HP, 115V motor, which provides ample power for a variety of drilling applications. This motor delivers a consistent performance, allowing users to tackle tough materials with ease. The variable speed range, which spans from 200 to 3,630 RPM, empowers users to select the perfect speed for their specific tasks, whether they are drilling through metal, wood, or plastic.

The JDP-17MF is equipped with a 17-inch swing capacity, enabling users to drill holes up to 14 inches from the center of the spindle. This feature significantly enhances the versatility of the drill press, allowing for the handling of larger workpieces comfortably. Additionally, the adjustable table, which can be tilted to accommodate angled drilling, further increases the machine's adaptability.

A key technology integrated into the JDP-17MF is the Laser X2 two-beam laser system. This innovative feature provides users with a precise visual guide for accurate alignment of drill bits and workpieces, which enhances drill accuracy. The built-in work light also ensures that your workspace is well-lit, minimizing potential errors in alignment and setup.

Safety is a primary focus in the design of the JDP-17MF. The drill press features a large, easy-to-access ON/OFF switch, as well as a safety key that prevents unauthorized use. The heavy-duty base is designed to add stability and reduce vibrations during operation, providing a safe and secure drilling experience.

Furthermore, the JDP-17MF includes a powerful rack-and-pinion height adjustment mechanism, which allows users to quickly and easily change the height of the table. This feature is particularly beneficial when working on varied projects requiring different drill depths.

In summary, the Jet Tools JDP-17MF is a high-quality drill press that combines power, precision, and safety. With its robust motor, variable speed settings, laser guide system, and ergonomic design, it meets the needs of both novice and experienced users. For anyone looking to enhance their woodworking or metalworking projects, the JDP-17MF is a worthy investment in efficiency and performance.
Top Page Image Contents