Jet Tools JDP-17MF operating instructions Disconnect the machine from the power source

Page 6

230 Volt Operation

If 230V, single phase operation is desired, the following instructions must be followed:

1.Disconnect the machine from the power source.

2.This JET drill press is supplied with four motor leads that are connected for 115V operation, as shown in Figure A. Reconnect these four motor leads for 230V operation, as shown in Figure B.

3.The 115V attachment plug (A), supplied with the drill press, must be replaced with a UL/CSA listed plug suitable for 230V operation (D). Contact your local Authorized JET Service Center or qualified electrician for proper procedures to install the plug. The drill press must comply with all local and national codes after the 230 volt plug is installed.

4.The drill press with a 230 volt plug should only be connected to an outlet having the same configuration (D). No adapter is available or should be used with the 230 volt plug.

Important: In all cases (115 or 230 volts), make certain the receptacle in question is properly grounded. If you are not sure, have a registered electrician check the receptacle.

NOTE: If 230V is needed, a 230V light bulb must be used in the lamp. Or, the lamp circuit may be re-wired in accordance with the diagram on page 21 and a 115V bulb may continue to be used.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Revision C1 01/06 Vantage Drive Elgin, IllinoisPart No. M-354169 Copyright WMH Tool GroupWarranty and Service More Information WMH Tool Group WarrantyTotal Length of Cord in Feet 25-50Page Grounding Instructions Volt OperationDisconnect the machine from the power source On-Off Switch Padlock Model No. BP-1, Stock NoSpecifications Table of ContentsContents of the Shipping Container Tools Supplied for AssemblyTools Required for Assembly Assembly Unplug machine from the power source Removing the Chuck and ArborAdjusting the Depth Stop Unplug the machine from the power sourceChanging Spindle Speeds Speed & Pulley Chart Return Spring Adjustment Table Tilt AdjustmentWork Light Basic Operation LubricationTroubleshooting Parts Breakdown for JDP-17MF 2658MZDU36 Parts List for JET JDP-17MF Drill PressIndex Part Description Size Qty BB-6205ZZ2807BB08C4 10706508A110607970A1 DC1200-442504MZC005 28065558U4Page Page Page WMH Tool Group

JDP-17MF specifications

The Jet Tools JDP-17MF is a highly versatile and robust floor-standing drill press, designed to meet the demands of both professional woodworkers and hobbyists alike. With its powerful motor and advanced features, this drill press offers precision, efficiency, and reliability, making it a valuable addition to any workshop.

One of the standout characteristics of the JDP-17MF is its 3/4 HP, 115V motor, which provides ample power for a variety of drilling applications. This motor delivers a consistent performance, allowing users to tackle tough materials with ease. The variable speed range, which spans from 200 to 3,630 RPM, empowers users to select the perfect speed for their specific tasks, whether they are drilling through metal, wood, or plastic.

The JDP-17MF is equipped with a 17-inch swing capacity, enabling users to drill holes up to 14 inches from the center of the spindle. This feature significantly enhances the versatility of the drill press, allowing for the handling of larger workpieces comfortably. Additionally, the adjustable table, which can be tilted to accommodate angled drilling, further increases the machine's adaptability.

A key technology integrated into the JDP-17MF is the Laser X2 two-beam laser system. This innovative feature provides users with a precise visual guide for accurate alignment of drill bits and workpieces, which enhances drill accuracy. The built-in work light also ensures that your workspace is well-lit, minimizing potential errors in alignment and setup.

Safety is a primary focus in the design of the JDP-17MF. The drill press features a large, easy-to-access ON/OFF switch, as well as a safety key that prevents unauthorized use. The heavy-duty base is designed to add stability and reduce vibrations during operation, providing a safe and secure drilling experience.

Furthermore, the JDP-17MF includes a powerful rack-and-pinion height adjustment mechanism, which allows users to quickly and easily change the height of the table. This feature is particularly beneficial when working on varied projects requiring different drill depths.

In summary, the Jet Tools JDP-17MF is a high-quality drill press that combines power, precision, and safety. With its robust motor, variable speed settings, laser guide system, and ergonomic design, it meets the needs of both novice and experienced users. For anyone looking to enhance their woodworking or metalworking projects, the JDP-17MF is a worthy investment in efficiency and performance.
Top Page Image Contents