Jet Tools JWBS-10OS operating instructions Introduction Specifications, Features

Introduction

This manual is provided by JET covering the safe operation and maintenance procedures for the JET model JWBS-10OS band saw. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or JET can also be reached at our web site: www.jettools.com.

Specifications
Model Number	JWBS-10OS
Stock Number	707200
Band Saw Size (in.)	10
Cutting Capacity (height) (in.)	4-1/8
Cutting Capacity (width) (in.)	9-1/2
Maximum Rip Left of Blade w/Fence (in.)	5
Maximum Rip Right of Blade w/Fence (in.)	5
Blade Length (in.)	67-1/2
Blade Speed (FPM)	2750
Minimum Blade Width (in.)	1/8
Maximum Blade Width (in.)	1/2
Table Size (in.)	13-1/8 x 13-3/8
Table Size with Extension (in.)	13-1/8 x 19
Table Tilt (degrees)	0° to 45°
Table Height from Floor (in.)	42-1/2
Wheel Diameter (in.)	10
Dust Chute Diameter (in.)	4
Overall Dimensions without stand (in.)	27 L x 16 W x 33 H
Overall Dimensions with stand (in.)	30 L x 18 W x 60 H
Stand Dimensions (in.)	25-3/4H; Base: 18-1/2L x 21W; Top: 13-1/2L x 16-1/2W
Motor	1/2 HP, 1Ph, 115V
Net Weight (approx.) (lbs.)	71
Shipping Weight (approx.) (lbs.)	75

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring obligations.

Features

6