Jet Tools JPS-10TS operating instructions Features, Specifications

Features

Figure 1

(mobile base purchased separately)

Specifications

Model Number		JPS-10TS	JPS-10TS
Stock Number		708480	708481
Blade Diameter (in.)		10	10
Arbor Diameter (in.)		5/8	5/8
Maximum Depth of Cut (in.)		3-1/8	3-1/8
Maximum Rip to Right of Blade (in.)		30	30
Maximum Rip to Left of Blade (in.)		12	12
Maximum Depth of Cut at 45°	(in.)	2-1/8	2-1/8
Table in Front of Blade at Maximum Cut (in)		10-1/2	10-1/2
Maximum Width of Dado (in.)		13/16	13/16
Maximum Diameter of Dado (in.)		8	8
Table Height (in.)		34-3/4	34-3/4
Extension Wings		steel	cast iron
Table Size without Extensions (in.)		20 x 27	20 x 27
Table Size with Extensions (in.)		44 x 27	44 x 27
Overall Dimensions (L x W x H)(in.)		60 x 27 x 40	60 x 27 x 40
Arbor Speed (RPM)		3600	3600
Dust Port Diameter (in.)		4	4
Dust Collection Minimum CFM Required		350	350
Motor	TEFC, 1-3/4HP, 1Ph, 115/230V*		TEFC, 1-3/4HP, 1Ph, 115/230V*
Net Weight (lbs.)		205	270
Gross Weight (lbs.)		215	280

*pre-wired 115 volt

The specifications in this manual are given as general information and are not binding. Walter Meier (Manufacturing) Inc., reserves the right to effect, at any time and without prior notice, changes or alterations to parts, fittings, and accessory equipment deemed necessary for any reason whatsoever.

7