Jet Tools PB-85, PB-150 operating instructions Introduction Specifications

Page 6

Introduction

This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures for a JET Model PB-85 or PB-150 Band Saw. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site: www.wmhtoolgroup.com.

Specifications

Model Number

PB-85

.................................................... PB-150

Stock Number

414495

.................................................... 414496

Motor

850W, 1Ph, 115V

..................................1800W, 1Ph, 115V

Blade Length (in.)

52.36

......................................................... 68.3

Blade Width (in.)

0.5

........................................................... 0.5

Blade Speeds (FPM)

80-260

.....................................................80-260

Round Capacity at 90° (in.)

3.35

........................................................... 5.5

Round Capacity at 45° (in.)

2.55

......................................................... 3.54

Rectangular Capacity at 90° (in.)

3.35

........................................................... 5.5

Rectangular Capacity at 45° (in.)

2.36

.............................................................. 4

Miter Angle (deg.)

0 to 45

..................................................... 0 to 60

Overall Dimensions (in.) (L x W x H)

33.5 x 14.2 x 25.6

................................... 40.1 x 27.6 x 35.4

Noise Emission, average (dB)

82 idling; 84.3 operating

......................... 79 idling; 81.2 operating

Net Weight (lbs.)

35

.......................................................... 123

Shipping Weight (lbs.)

42

.......................................................... 165

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, WMH Tool Group reserves the right to change specifications at any time and without prior notice, without incurring obligations.

6

Image 6
Contents Vantage Drive Elgin, Illinois Part No. M-414495Revision A1 02/07 Copyright WMH Tool Group Warranty and Service Table of Contents Page Page Introduction Specifications Features and Terminology Model PB-85 is shown features are similar for the PB-150Contents of the Shipping Container UnpackingAssembly Band Saw should be disconnected from power during assemblyStock Stop Grounding Instructions Volt OperationAdjustments Extension cordsBlade Guide and Bearings Blade Tension Miter CutsBow Depth Stop Blade TrackingBlade Replacement Vise AdjustmentGeneral Operating Procedure OperationMaintenance Blade Speed and Downfeed PressureTroubleshooting TroubleProbable Cause Remedy Replacement Parts Model PB-85 Bow Assembly See parts list on pagesModel PB-85 Base Assembly Parts List Model PB-85 Index No. Part No Description Size QtyTS-1504041 BB-6202LLUTS-2361081 TS-1540071Model PB-150 Bow Assembly Model PB-150 Base Assembly Parts List Model PB-150 TS-1503121 PB150-046-11TS-1503091 BB-6200ZZPB150-126-1 TS-1482041Electrical Connections Model PB-85 Electrical Connections Model PB-150