Fence Adjustments

Note: Fence adjustments should be performed in the order given.

Fence Side Plate

Table Top

C	Back Rail	B
			Guide Tube
		Front Rail

Figure 14

Leveling Fence to the Saw Table

1.Place the fence on the table and lock it.

2.View the fence from the left side of the saw (Figure 14). Look for the space between the table and the fence bottom to be equal along the entire length of the fence (A, B, Fig. 14).

If adjustment is necessary:

3.Unlock the fence.

4.Using a 10mm wrench, loosen the lock nut that secures the foot adjustment (C, Fig. 14)

5.Rotate the foot, retracting it such that it does not come in contact with the back rail (Fig. 14).

6.Raise or lower two nylon adjustment screws (D, Fig. 15) the same number of turns until the space between the bottom of the fence and the table is the same. Care must be taken to raise or lower the fence on each side equally or the fence may not be 90° to the table after the height adjustment is performed.

When the space at points A and B (Fig. 14) are the same:

7.Extend the foot (C, Fig. 14) by rotating it until it just comes in contact with the back rail.

8.Tighten the lock nut to secure the foot, preventing it from further rotation.

Figure 15

Figure 16

Adjusting Fence Parallel to the Miter Slot

1.Place the fence next to the outside edge of the right miter slot and lock it.

2.The fence should be even with the miter slot from front to back.

3.If the fence is not even along the length of the miter slot, unlock the fence, remove it and turn upside down (Figure 16).

4.Adjust one of the two setscrews (E, Fig. 16) until the fence is even with the miter slot edge along its entire length when locked.

Note: You may need to re-adjust the clamping pressure after aligning the fence.

Clamping Pressure Adjustment

The XACTA Fence II has been adjusted at the factory to lock securely when the lock handle is pushed down. If adjustment is needed:

1.Unlock the fence.

2.Remove the fence from the guide rail.

3.Turn the fence over.

4.Adjust each of the two setscrews (E, Fig. 16) exactly the same number of rotations until the fence is held securely when the lock handle is pushed down.

A clockwise rotation of the setscrews will increase the cam pressure. Counterclockwise rotation will decrease cam pressure.

JWCS-10 specifications

The Jet Tools JWCS-10 is a powerful and versatile woodcutting solution designed primarily for woodworkers and DIY enthusiasts. This table saw is specifically engineered to provide precise cuts with exceptional accuracy, making it an essential tool for both professional workshops and home garages.

One of the standout features of the JWCS-10 is its heavy-duty construction, built to withstand substantial wear and tear over time. The table saw incorporates a robust cast iron table that provides a stable surface for cutting. This solid base not only enhances stability but also minimizes vibration during operation, resulting in smoother cuts and improved overall performance.

Equipped with a 15-amp motor, the JWCS-10 delivers impressive power, allowing it to tackle even the toughest hardwoods with ease. The motor can achieve a maximum RPM of 4,800, providing the necessary speed for a variety of cutting applications. The saw blade can be easily adjusted to various angles, accommodating both beveled and miter cuts. This versatility expands the range of carpentry projects that can be completed with precision.

The JWCS-10 also features a large rip capacity, capable of handling wide boards. The rip fence is easily adjustable and locks securely, offering enhanced accuracy for repetitive cuts. Additionally, the table saw includes a built-in splitter and anti-kickback pawls, essential safety features that minimize the risk of kickback during operation.

Another notable technological aspect of the JWCS-10 is its dust collection system. It incorporates a 2-1/2 inch dust port that connects to standard shop vacuums, ensuring a cleaner workspace and improved visibility while cutting. This is especially important for woodworkers who need to maintain a tidy environment and reduce potential hazards from sawdust accumulation.

Furthermore, the JWCS-10 boasts user-friendly features that enhance the overall cutting experience. A clear blade guard allows for maximum visibility while also providing necessary safety protection. The inclusion of a push stick ensures that users can maintain a safe distance from the blade during operation.

In summary, the Jet Tools JWCS-10 is engineered for durability, precision, and safety. With its powerful motor, extensive cutting capacity, and thoughtful design features, it is an excellent investment for anyone serious about woodworking. Whether you are a seasoned pro or a hobbyist, the JWCS-10 will help you tackle a wide range of projects with confidence and ease.