Installation, Tools required | Jet Tools JWCS-10 specification

Installation

Tools required

Drill with 5/16" drill bit 10mm open end wrenches Cross point screwdriver Adjustable square Hammer (or rubber mallet) Straight edge

The following instructions are for installing the XACTA Fence II and Rail System on JET Models JWCS-10 and JWTS-10 series table saws.

Front Rail Installation

Referring to Figures 1:

1.With a 5/16” drill bit, drill out the two threaded holes on the table front (C).

Note: By drilling out the threads you will gain the needed room for adjustment of the front rail.

2.Identify the front rail (A), which is 2” x 2” with slots running along each side.

3.Align the slots on the front rail to the four holes in the front edge of the saw table (Figure 1).

Referring to Figure 2:

4.Lightly secure the front rail to the saw table and extension wings with four 1/4-20 x 1-1/2 hex cap screws, eight 1/4” flat washers, four 1/4” lock washers, and four 1/4” hex nuts. Tighten just enough to hold the rail next to the table but keep loose enough to allow height adjustment.

The front rail must be 2-3/16" down from the table top in order to function properly.

5.Place an adjustable square on the table as shown in Figure 3.

6.Check the height of the front rail at several locations along the surface of the saw table. The front rail must be parallel with the table top.

7.When the front rail has been correctly positioned, tighten all mounting screws securely with two 10mm wrenches.

Figure 1

Figure 2

Figure 3

JWCS-10 specifications

The Jet Tools JWCS-10 is a powerful and versatile woodcutting solution designed primarily for woodworkers and DIY enthusiasts. This table saw is specifically engineered to provide precise cuts with exceptional accuracy, making it an essential tool for both professional workshops and home garages.

One of the standout features of the JWCS-10 is its heavy-duty construction, built to withstand substantial wear and tear over time. The table saw incorporates a robust cast iron table that provides a stable surface for cutting. This solid base not only enhances stability but also minimizes vibration during operation, resulting in smoother cuts and improved overall performance.

Equipped with a 15-amp motor, the JWCS-10 delivers impressive power, allowing it to tackle even the toughest hardwoods with ease. The motor can achieve a maximum RPM of 4,800, providing the necessary speed for a variety of cutting applications. The saw blade can be easily adjusted to various angles, accommodating both beveled and miter cuts. This versatility expands the range of carpentry projects that can be completed with precision.

The JWCS-10 also features a large rip capacity, capable of handling wide boards. The rip fence is easily adjustable and locks securely, offering enhanced accuracy for repetitive cuts. Additionally, the table saw includes a built-in splitter and anti-kickback pawls, essential safety features that minimize the risk of kickback during operation.

Another notable technological aspect of the JWCS-10 is its dust collection system. It incorporates a 2-1/2 inch dust port that connects to standard shop vacuums, ensuring a cleaner workspace and improved visibility while cutting. This is especially important for woodworkers who need to maintain a tidy environment and reduce potential hazards from sawdust accumulation.

Furthermore, the JWCS-10 boasts user-friendly features that enhance the overall cutting experience. A clear blade guard allows for maximum visibility while also providing necessary safety protection. The inclusion of a push stick ensures that users can maintain a safe distance from the blade during operation.

In summary, the Jet Tools JWCS-10 is engineered for durability, precision, and safety. With its powerful motor, extensive cutting capacity, and thoughtful design features, it is an excellent investment for anyone serious about woodworking. Whether you are a seasoned pro or a hobbyist, the JWCS-10 will help you tackle a wide range of projects with confidence and ease.