Unpacking
Open shipping container and check for shipping damage. Report any damage immediately to your distributor and shipping agent. Do not discard any shipping material until the Lathe is assembled and running properly.
Compare the contents of your container with the following parts list to make sure all parts are intact. Missing parts, if any, should be reported to your distributor. Read the instruction manual thoroughly for assembly, maintenance and safety instructions.
Contents of the Shipping Container
1 Lathe
1Steady Rest (mounted on Lathe)
1Follow Rest (mounted on Lathe)
110” Three Jaw Chuck (mounted on Lathe)
112” Four Jaw Chuck
1Face Plate (12” Face Plate for 14” & 16” lathes; 16” Face Plate for 18” & 22” lathes)
1Tool Box containing:
1 Box Wrench Set
1 Hex Wrench Set
1 Spindle Sleeve
1 Center
6 Leveling Bolts
6 Leveling Pads
1 Flat Blade Screwdriver
1 Cross Point Screwdriver
1 Chuck Wrench
1 Tool Post Wrench
1 Light Bulb
1 Adjustable Wrench
1 Oil Gun
1 Cross Feed Handle
2 Shear Pins
1 Live Center (MT4 for 14” & 16” lathes;
MT5 for 18” & 22” lathes)
1Operating Manual
1Parts List Manual
1Warranty Card
contents of Tool Box
Read and understand the entire contents of this manual before attempting
10