Electrolux TM-75 operating instructions Trouble Shooting Guide, Repairs, Spare Parts

Page 15

7.Trouble Shooting Guide

SAW WON’T START, SAW IS TOO SLOW TO START, SAW MOTOR MAKES HUMMING NOISE

Make sure plug is in live electrical circuit.

Voltage from source may be too low.

SAW SHUTS OFF ABRUPTLY

Power is interrupted, check power source and restart the saw.

Voltage from source may be too low. Check for low voltage.

WATER PUMP SYSTEM WON’T START OR STOPS ABRUPTLY

Check to see that pump is plugged in and is connected to plastic tubing.

Check to see if pump is completely submerged.

Check to see if the water pump is clean and free of any chips, debris, clogging, etc.

SAW WON’T CUT STRAIGHT

Check to see if saw frame or rolling guide bar is bent.

Check to see if the support for the cutting table is bent.

Check for possible defective blade.

Materials may have been pushed or forced through the cut. Let blade pull material for a clean cut.

Check cart tracking adjustment.

SAW BLADE DOESN’T CUT WELL

Blade needs to be dressed.

Blade may be mounted on saw backwards.

Blade may be worn or damaged.

Blades life may be used up (old blade)

The manufacturer accepts no responsibility caused by unsuitable use or modifications. At the workstation, the sound pressure level may exceed 85 dB

(A). In this case hearing protection must be worn.

8. Repairs

Entrust all repairs to your authorized dealer only.

We carry out all repairs in the shortest possible time and at the most economical prices. (See front page for our address and phone numbers) Contact your authorized FELKERdealer concerning maintenance and repairs.

9. Spare Parts

For quick supply of spare parts and to avoid any lost time, it is essential to quote the data on the manufacturer’s plate fixed to the side of the motor and the part number(s) and description to be replaced with every order.

The instructions for use and spare parts found in this document are for information only and are not binding. As part of our product quality improvement policy, we reserve the right to make any and all technical modifications without prior notice.

The manufacturer accepts no responsibility caused by unsuitable use or modifications.

15

Image 15
Contents West 119th Street Olathe, Kansas Operating Instructions and Parts ListHearing Hazard ContentsSymbols Definitions Symboles Definición De Simbolos Prohibido Para Personas Ajenas a La Obra Page Figures DE Référence Figures DE Référence Safety First Safety First DO’S and do Nots Features BenefitsIndication Mandatoryinformation Instruction Unpacking AssemblyWater Pump Installation Water Pump Safety Guidelines and MaintenanceCutting Depth Operating ProceduresElectrical Connections Cutting TableCheck the Parallel Alignment Alignment ProceduresWater Tubing Removal Fig’s 10 Check the Blade in Slot AlignmentOptional Accessories MaintenanceEntrust all repairs to your authorized dealer only Trouble Shooting GuideRepairs Spare PartsDiagram TM-75 Parts List Page Felker’s New Equipment Warranty Felker Canada Central and South America